Add to Registry
Please choose the registry you want to add this product to:
Rogue’s American-made Guard Rails offer industrial strength protection and security in a wide range of sizes and set-up options. These are the same rails we initially built for use at our own facilities in Columbus, so we stand by their quality in both construction and practice.
Rogue Guard Rails are available in three thickness options (3”x3”, 4”x4”, 6”x6”), with the same dimensions applying to the posts and crossbeams. There are also five freestanding unit lengths to choose from— 3’, 4’, 5’, 6’ and 10’ — making the guard rails adaptable to any type of space. A freestanding section includes (2) posts, (2) crossbeams, and the 5/8” hardware to connect them (floor mounting hardware is NOT included). The length is measured from center of post to center of post.
Important: All Guard Rail posts should be completely and securely fastened to the ground to ensure their effectiveness. Floor mounting hardware is not included.
In addition to the freestanding sections, we also offer add-on sections (1 post and 2 crossbeams), that can be used to extend your railing. These will be available in the same sizes and lengths as the freestanding sections.
Please Note: If you plan to create a 90 degree angle with your guard rail add-ons, you will need to purchase an additional bolt kit. A standard post comes with 4 bolts, but to turn a corner, it will require 8 bolts (since 4 total crossbeams will be mounted to it). There are separate corner bolt kits available for the 3x3, 4x4, and 6x6 guard rails.
Guard Rail Sizing Comparison
|Made In USA||Yes|
|Length||Varies (3' / 4' / 5' / 6' / 10')|
|Width||Varies (3" / 4" / 6")|
|Height||3x3: 48.375" // 4x4 & 6x6: 48.5"|
|Other Product Specs||Holes in footplate for mounting to the floor|
|Steel Notes||3x3: 11 Gauge Steel // 4x4 & 6x6: 1/4" Thick Steel Wall|
All variations of the Rogue Guard Rail are made here in Columbus, Ohio, using quality steel for the posts and crossmembers (11-gauge in the 3x3 size, 1/4” Thick Wall Steel for the 4x4 and 6x6), as well as the mounting footplates (.375” thick for the 3x3 size, 1/2” thick for the 4x4 and 6x6). The mounting footplates leave no larger than a 10”x10” footprint, allowing optimal maneuverability around the perimeter of the rail. The full unit is also painted in our Safety Yellow powdercoat finish for max visibility.
Like most of the in-house products on Rogue Supply, we built and tested these guard rails for use in our own Columbus distribution center before determining if they performed up to par for wider production. When mounted to the floor securely, we trust the Rogue Guard Rails to effectively stop a renegade forklift and just about anything else that moves where it shouldn’t.
All guard rail components are made to order and ship from our Columbus warehouse (larger versions will ship via freight). The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.