No Customs Fees!

Ships from USA & Rogue Pays Customs Fees Learn More

Monster Lite/Infinity Single Bar Holder

Monster Lite/Infinity Vertical Mount Single Bar Holder
$90.00 CAD

Availability: Ships in 14-30 Days

Recommended for Squat Stands & Flat Foot Racks
Monster Lite/Infinity Horizontal Mount Single Bar Holder
$90.00 CAD

Availability: Ships in 14-30 Days

NOT compatible with Squat Stands & Flat Foot Racks

**WARNING: The Rogue Single Bar Holder should NEVER be mounted below a pull-up bar, and ALWAYS on the exterior of a Rack/Rig/Squat Stand. Failure to follow these guidelines may result in severe injury.

Single Bar Holder

A convenient, easy-to-mount accessory that allows you to store a barbell directly on the exterior of an existing Rogue rack, rig, or squat stand. The Single Bar Holder is compatible with both our Infinity and Monster Lite Series, with 5/8” hardware and mounting plate holes 4” on center. Once installed, almost any standard Olympic barbell can be placed sleeve-first into the Bar Holder’s 7” tall steel tube, creating a secure storage solution that won’t damage the bar’s knurling.

Please Note: Horizontal Mount Bar Holder is NOT compatible with S-Series Squat Stands, or Flat Foot Racks. Instead the Vertical Mount is recommended for use with these products.

The Rogue Single Bar Holder should be mounted only on the exterior of a rig/rack/stand. As always, Rogue recommends keeping the area directly under pull-up bars clear of attachments at all times.

Single Bar Holder Specifications:

  • Made in the USA
  • Dimensions: 5.25" x 3" x 10"
  • Steel Tube: 7” height, 2” inside diameter
  • Applications: Vertical Barbell Storage for Home Gym, Weight Room, or Training Center
  • 5/8” bolts and fasteners
  • Holes in Mounting Plates 4” on Center
  • Mounting Hardware Included

Important: This barbell holder is compatible only with Infinity and Monster Lite Rigs, Racks & Stands. For our Monster version, see the Rogue Monster Single Bar Holder.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Length 5.25"
Width 3"
Height 10"
Other Product Specs Holes in mounting plate at 4" on center. Mounting hardware included.
Steel Notes 2" Inside diameter steel tube.
Infinity Compatible Yes
Monster Lite Compatible Yes
Monster Lite/Infinity Single Bar Holder is rated 4.2 out of 5 by 33.
Rated 5 out of 5 by from Great attachment Great attachment for my home gym Monster Lite stand. Allows me to store my curl bar out of the way.
Date published: 2021-06-24
Rated 5 out of 5 by from Just what I was looking for I have two of them attached to my vertical plate tree, and just as expected from rogue, its sturdy and its a hard to beat type of quality. People complain about them scratching up the sleeve. I have the cerakote Ohio bar and Bella bar, it does scratch it but its not a huge deal for me. They're scratched up anyways from plates coming on and off of them. 10/10
Date published: 2021-05-07
Rated 5 out of 5 by from works as it should perfect fit and holds the bar without being clunky or in the way.
Date published: 2021-04-27
Rated 5 out of 5 by from Great product Serves its purpose perfectly strong and keeps my barbell neatly in place out of the way
Date published: 2021-04-08
Rated 5 out of 5 by from Does it’s job perfect Great little add on. Smooth bevel. Hold barbell perfectly with out worrying about damaging the sleeves.
Date published: 2021-03-01
Rated 4 out of 5 by from Vertical Holder Needs Longer Mounting Bracket It does what it's supposed to do. Only complaint with the vertically mounted bar holder is that I'm unable to mount it to the lowest holes on my RML-3 rack because the upper hole of the bar holder's mounting bracket intersects with the lower horizontal members on the rack which are welded in place and won't allow me to pull a bolt through. It would be nice to have it at the lowest position on the rack because my garage gym ceiling is relatively low and I really need to be careful not to hit the bar with it when storing it.
Date published: 2021-02-04
Rated 5 out of 5 by from Vertical Holder - Gets the job done I have an SML-1 rack and preferred a vertical stand than a horizontal one for space purposes. When you install it at the bottom, screwing in the holder is a bit hard because there's little space there, but it's really not a problem. As others have stated, there is nothing at the bottom within the holder, so your bar rubs along the inner metal tube when you place it in. I personally don't care much about the very little cosmetic damage it has caused (although I really don't see none on my bar) because I slowly wiggle my bar to the bottom while holding it. I'm sure you can scratch up your bar if you just let it go and let gravity take its course, which explains other people's comments... Anyway, works like a charm!
Date published: 2020-12-06
Rated 4 out of 5 by from Mounted to the Olympic Plate Tree I bought this to Mount to my Olympic Plate Tree 2.0, and it mounts perfectly. Great storage for my extra barbell. Only reason that this is not a 5 star review is due to the lack of protection inside the holder. The bare steel can absolutely scratch up sleeves and could do so well with some UHMW. I lined mine with UHMW tape, which works well, just was time consuming.
Date published: 2020-12-05
  • y_2021, m_9, d_16, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_33
  • loc_en_US, sid_XX11357, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_roguecanada