Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
522 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
522 Reviews
Made in U.S.A.
Hundo Pricing

Options*

9LB
13LB
18LB
26LB
35LB
40LB
44LB
53LB
62LB
70LB
80LB
88LB
Pounds Away From HundoPricing
491LB
Total Price:
CA$35.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"
Product Description
Gear Specs
Shipping
Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping

Fast Rogue Shipping

Rogue prides itself on fast, professional shipping, often with same-day turnaround times. Your kettlebells will be packaged safely and efficiently, and you’ll be able to follow the progress of your order from our factory floor to your door using the online Rogue Shipping Tracker. Please note, all KBs over 70LB in weight will ship freight.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 522 Reviews
Oklahoma City, Oklahoma
★★★★★
★★★★★
18 days ago
Perfect!
Great kettlebells made right here in the USA. Shipped fast too! These are my go to bells and Company. Thanks!
Yes, I recommend this product
Originally posted on roguefitness.com
RIan
Redwater, AB
★★★★★
★★★★★
1 month ago
Great American made Kettlebell
I had debated and looked at other Kettlebells but Rogue's stood out to me because they are American made. I am thrilled with the quality, fit and finish of the E-Coat Kettlebell.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Fred8
Boston, MA
★★★★★
★★★★★
1 month ago
Perfect
I don't actually have anything to compare these to because I'm new to kettlebells, but I'm very pleased with the 35 lb bell I bought. After a month or so of swings and get-ups with it I'm ready to purchase a 53 lb bell and will be buying the same line. Best features: 1. Look -- especially next to Rogue E-coat plates. 2. Feel -- very natural, if a little slippery -- perfect with chalk 3. Balance -- sits perfectly in my hands/hand for swings and get-ups. 4. Maintenance -- basically none required. Chalk basically disappears off the thing after a workout and what little remain comes off easily with a single wipe from the towel I use to clean my sweat off the bell.
Yes, I recommend this product
Originally posted on roguefitness.com
Don930
Buffalo NY
★★★★★
★★★★★
1 month ago
Great American made kettlebell!
Love the e-coat and the new rogue line of KBs. The handle seems to be the size of the other Rogue kbs I have. I'm not a big chalk guy, but when I do need it for this, rarely, the coating holds chalk well. The only wish I have is to have Rogue color coat the handles on these. Great product, keep up the good work Rogue!!
Yes, I recommend this product
Originally posted on roguefitness.com
Katy Texas
★★★★★
★★★★★
1 month ago
Rogue quality
Received as expected. It’s a beast of a bell. Buy once cry once.
Yes, I recommend this product
Originally posted on roguefitness.com
Alib
Gulfport, MS
★★★★★
★★★★★
1 month ago
Perfect Addition
Perfect addition for the at home gym. The material is clean and fantastic - I will be ordering more sizes soon!
Yes, I recommend this product
Originally posted on roguefitness.com
Spartanstrong
Iowa
★★★★★
★★★★★
2 months ago
Perfect sized handle
This kettlebell has the perfect sized handle and well balanced for single hand and both hand grips. Will be ordering more for myself and for gifts!!
Yes, I recommend this product
Originally posted on roguefitness.com
psy6xray
Oregon
★★★★★
★★★★★
2 months ago
Absolutely stunning!
Made in the United States (this alone is 100%), beautiful finish, grip and texture great, shipping is crazy.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery