Rogue S-Base Floor Mounting Feet

★★★★★
★★★★★
4.9
8 Reviews
Made in U.S.A.

Rogue S-Base Floor Mounting Feet

★★★★★
★★★★★
4.9
8 Reviews
Made in U.S.A.
Rogue S-Base Floor Mounting Feet - Pair
CA$35.00
Rogue S-Base Floor Mounting Feet - 2 Pair
CA$55.00
Single Concrete Anchor
CA$2.67

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight4LB
Steel Notes.188 x 2.25 x 2.25 Bent Angle
Infinity CompatibleYes
Monster Lite CompatibleYes
Product Description
Gear Specs
Shipping
Product Description

Sold in pairs or as a set of four, these steel mounting feet are designed specifically for securely bolting down a Rogue Infinity S-Series or Monster Lite SML Squat Stand. Use with any other rack or stand is not recommended.

Read More

S-Base Floor Mounting Feet

Sold in pairs or as a set of four, these steel mounting feet are designed specifically for securely bolting down a Rogue Infinity S-Series or Monster Lite SML Squat Stand. Use with any other rack or stand is not recommended.

Our S-Base Floor Mounting Feet are manufactured in house using 3/16” thick bent steel measuring 2.25” in height and width. Compatible 5/8” mounting hardware is included standard.

If your squat stand is used for kipping pull-ups and/or aggressive racking, or if you just want to take extra safety measures to ensure optimal stability of the unit, a set of S-Base Floor Mounting Feet delivers that peace of mind with relatively stress-free installation.


Gear Specs

Specifications:

  • Made in the USA
  • For use ONLY with Infinity S-Series and Monster Lite squat stands
  • Steel: .188 x 2.25 x 2.25 Bent Angle
  • Finish: Black Powdercoat
  • 6" hole spacing
  • Concrete Anchors available at additional cost
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Recommended Products

Reviews

1 - 8 of 8 Reviews
modaddy
★★★★★
★★★★★
17 days ago
Works on RML-390F
i purchased the RML-390F thinking i wasn’t going to want/need to bolt my rack to the ground. i ended up making an 8x8 DIY deadlift platform and decided i’d like the extra security of a bolted rack since i do a lot of conjugate-type band work. these fit perfectly to the 390F. i purchased two pairs and attached them to the outside of each triangular joining bracket, the holes line up just right. i bought a large wood screw that fit the whole and screwed those suckers in to the plywood underneath. i hope this helps!
Yes, I recommend this product
Originally posted on roguefitness.com
PGAR
Ontario, Canada
★★★★★
★★★★★
1 month ago
Sturdy, would prefer larger hole on floor side
Very, very sturdy bracket, with nice powder coating, that I used to cleanly mount my SML-2 to my lifting platform. It makes for a very professional looking result for the mounting. My only "wish" is that the hole on the floor side were a tiny bit larger. I'm assuming the hole is sized for a common concrete anchor, but mine is bolted down to a plywood platform. I needed to use a 3/8" bolt on the floor side of mine, which - while plenty strong enough - looks a bit silly when there are two big 5/8" bolts holding the bracket to the rack. A little bit of extra clearance ensuring a 1/2" bolt or lag screw would fit would have been nice.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
JJB86
Boston, Massachusetts
★★★★★
★★★★★
2 months ago
Straightforward item. Does what it's designed for.
As the title says...not much to review. Good quality item. Allows squat stand to be bolted to floor or platform. I have my SML -1 bolted to a platform on all four corners. When done like that it makes for a very stable set-up.
Yes, I recommend this product
Originally posted on roguefitness.com
Scotlyn
VA
★★★★★
★★★★★
3 months ago
Solid Footing
Well built and the hardware fits perfectly. The only real improvement I recommend would be to add a hole on the upper part to allow access to the one blocked rack hole. I use some simple L-bolts for band attachment and the extra hole would be nice.
Yes, I recommend this product
Originally posted on roguefitness.com
nathan_tz
Vancouver
★★★★★
★★★★★
6 months ago
A Must Have For S1 or S2 squat Stand
A small accessory but keep the racks stay in place. Excellent product.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
jlaflen73
Washington
★★★★★
★★★★★
1 year ago
Keeping the half rack from moving
Finally bought these to keep the half rack from moving when I re-racked. Even with +100kg in plates hanging from storage the rack would slide. These feet are a very unobtrusive way to keep it fixed. Really glad I finally did this!
Originally posted on roguefitness.com
Kelv
Virginia Beach, Va
★★★★★
★★★★★
3 years ago
Great for RML-390f
Bought this to bolt down my rogue RML-390f rack. Great fit and comes with hardware to bolt to rack, but I bought longer bolts. Longer bolts bolt the feet to rack and are used as band pegs. I also purchased a bolt to secure rack onto platform. Now I can use bands and monolift attachment!!
Yes, I recommend this product
Originally posted on roguefitness.com
Billy B
★★★★★
★★★★★
7 years ago
Fitted to RML-390F
These mounting feet have a 6" hole spacing. I was told they would not fit my SML-2 at the center uprights when I emailed to ask, this is wrong they do fit. I have since upgraded from squat stand to a rack. I took a chance and ordered these because I thought they would fit somewhere on the base of my rack even if they only using one hole. The 6" spacing allows me to mount these at the upright bracket or in the empty holes at the center. The bracket seems very solid and comes with mounting hardware to bolt it to the rack, it does not come with concrete bolts to mount it to the ground. That's okay for me as I will be using a platform to bolt to.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery