Live Chat

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
589 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
589 Reviews
Made in U.S.A.
KB-9LB Rogue Kettlebell - E Coat
CA$35.00
KB-13LB Rogue Kettlebell - E Coat
CA$49.00
KB-18LB Rogue Kettlebell - E Coat
CA$55.00
KB-26LB Rogue Kettlebell - E Coat
CA$62.00
KB-35LB Rogue Kettlebell - E Coat
CA$76.00
KB-40LB Rogue Kettlebell - E Coat
CA$83.00
KB-44LB Rogue Kettlebell - E Coat
CA$90.00
KB-53LB Rogue Kettlebell - E Coat
CA$97.00
KB-62LB Rogue Kettlebell - E Coat
CA$110.00
KB-70LB Rogue Kettlebell - E Coat
CA$131.00
KB-80LB Rogue Kettlebell - E Coat
CA$138.00
KB-88LB Rogue Kettlebell - E Coat
CA$158.00
Rogue Kettlebell - E-Coat 26-35-70LB Set
CA$250.00
Includes 1 of each weight: 26, 35, 70lbs
Rogue Kettlebell - E-Coat 35-53lb Set
CA$325.00
Includes 2 of each weight: 35lb & 53lb
Rogue Kettlebell - E-Coat 9-70LB Set
CA$735.00
Includes 1 of each weight: 9, 13, 18, 26, 35, 40, 44, 53, 62, 70lbs

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"
Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).
Loading

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Note: *Due to the casting process, cast products may have minor variances in the finish.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

Loading
1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

Loading
2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

Loading
3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

Loading
4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

Loading
5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 589 Reviews
ZachMc
Easton, PA
★★★★★
★★★★★
1 week ago
Buying them all
I started my collection with a pair of 26# kbs and have gradually been adding more. Presently I’ve got every size between 26# and 60#. As they size up the handles don’t change much making adaptation to the new weight easy. I love the coating, I rarely need to add chalk for grip. All around they are great KBs
Originally posted on roguefitness.com
Kalama
Iowa
★★★★★
★★★★★
1 week ago
High quality, made in USA!
If accidentally dropped, ductile iron is far more durable. The two-pair set (35, 53) that I purchased were well packaged to protect during shipment, with no damage to the E-Coat finish. Overall the casting is good with no rough spots. One of the 53 lb has a small minor cosmetic flaw, and the other three kettlebells are flawless. Using a scale known to be accurate, each pair is within a few ounces of each other and within 3% of specified kg weight.
Yes, I recommend this product
Originally posted on roguefitness.com

Response from Rogue Fitness:

6 days ago
We're sorry to hear about this cosmetic flaw you mentioned. Our team is reaching out now to take a look and rectify any issues.
WillieD
Mobile, Alabama
★★★★★
★★★★★
3 weeks ago
Gorgeous
A spectacular instrument. Not too grippy nor slippy. Beautiful and, aside from the weight of it, easy to handle. Speaking of, the handle is just right. 10/10 recommend.
Yes, I recommend this product
Originally posted on roguefitness.com
Mr_Such
Jenks, OK, United States
★★★★★
★★★★★
5 weeks ago
Best looking and most solid
I love the look. Simple and solid black. The E coat is outstanding. A small amount of chalk and I’m good to go. So far no chipping, no rust, nothing. I’m very pleased and I highly recommend this specific line of KBs
Yes, I recommend this product
Originally posted on roguefitness.com
The Big Greensmen
Silver Spring, Maryland
★★★★★
★★★★★
5 weeks ago
Good bell. Could be improved
I buy mismatched kettlebells on purpose to compare and to ensure that I can do movements with various equipment regardless of variations between brands. This bell is good, but the handle is thicker and the window is smaller than the other bell of the same size I have. This doesn’t affect swings at all, but it makes the rack position much more difficult for someone with big hands/arms. I like that the thicker handle can help improve grip strength, but I would suggest a larger window.
Yes, I recommend this product
Originally posted on roguefitness.com
Bmartin
Pennsylvania
★★★★★
★★★★★
April 18
Good kettlebell, poor finish
Been collecting these bells for about a year. Until recently, they've all been great. However, 2 of the last 4 bells I received showed up with a finish equivalent to 60-80 grit sandpaper. Any clean or snatch movements would tear up your arms after a handful of reps. Reported to Rogue customer support and was told the finish I described is considered in-spec. They also stated these bells are sourced from multiple vendors which is why the finish is different from bell to bell. I've since had to sand these bells down to make them usable. This is not the type of product, or customer support, I would expect from a company with Rogue's reputation. Outside of the recent issues I've experienced with the finish, they have otherwise been great kettlebells. That being said, I don't consider it acceptable to be sanding and painting brand new kettlebells. For me, that means as I continue to add kettlebells to my gym, they will no longer be coming from Rogue.
Originally posted on roguefitness.com

Response from Rogue Fitness:

April 21
Thank you for this feedback on the Kettlebells you received. We agree these should show up usable and would like to look into this further. We apologize for your poor experience thus far.
NikoM95
Los Angeles, CA
★★★★★
★★★★★
April 18
Holding up great!
Been using this kettlebell for a little over a month now and I am absolutely in love. I’ve never seen such amazing results with what’s basically the equivalent of a cannonball lol. If you’re hesitating… just make the snatch. It’s worth it.
Yes, I recommend this product
Originally posted on roguefitness.com
Ragnar Ronson
★★★★★
★★★★★
April 11
Gnar gnar Binks!
Needed to level up to a different dimension. Got me this beef castle, blew my cheeks to rivendale. Solid purchase no doubt
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery