SHIPPING DELAY: 5-7 DAYS.
Online orders and operations are active. Retail store is closed. | Covid-19 Status
No Customs Fees!

Ships from USA & Rogue Pays Customs Fees Learn More

Bolt-On Double Change Plate Storage

Bolt on Double Change Plate Storage
$52.67 CAD

Availability: Ships in 14-30 Days

Bolt-On Double Change Plate Storage

One attachment, twice the storage.

Rogue’s Bolt-On Double Change Plate Storage unit mounts easily to the uprights of an Infinity or Monster Lite rig, rack, or stand. With two storage posts each offering 5” of usable length, this single attachment gives you nearly a foot of additional change plate storage capacity within arm’s reach.

The posts on the Double Change Plate Storage unit are 9.5” on center, with mounting holes at 6” on center. All necessary 5/8” hardware for set-up is included.

Specifications:

  • Made in USA
  • Includes (2) Storage Posts, 9.5” on center
  • Loadable length (per post): 5” (14.6 cm)
  • Mounting Holes: 6” on center
  • Compatible with Infinity AND Monster Lite Series

Note: Rogue also offers the Monster Lite Double Change Plate Storage attachment, which is compatible ONLY with Monster Lite uprights, and mounts using a steel channel and convenient detent pin.

See more of Rogue's Plate Storage Accessories here.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Length 6"
Width 2"
Height 14"
Other Product Specs Usable Post Length - 5", Mounting holes 6" on center
Infinity Compatible Yes
Monster Lite Compatible Yes
Bolt-On Double Change Plate Storage is rated 4.8 out of 5 by 15.
Rated 4 out of 5 by from Perfect for change & fractional plates These posts fit perfectly up and out of the way on my short cross-member. The only negative is I think Rogue can be a bit more innovative and use some flat or flush-mount bolts. As they are, the nuts take up space and wear against the plates.
Date published: 2017-05-04
Rated 5 out of 5 by from Nice product but take note there is one in a box I bought these to store 2 1/2, 5, and 10 lbs plates. Works great for smaller plates. Same great quality as all the other products. Just note that if you want one of these on both sides of your rack, then you will need to order two. There is only one in each box which I overlooked which made it a more expensive purchase than I had expected.
Date published: 2018-10-05
Rated 5 out of 5 by from Works As Advertised Bolts to any 2x2 system with standard 2" spacing and 5/8" holes (I have a non-Rogue rack). The short horns make it easier to fit it in between posts, and the horn diameter is perfect for my change plates--just small enough to make sliding easy, but with minimal slop. The bolt and nut do protrude into the space where the plates stack on the *upper* horn, but you still have 5" for storage (only an issue if you're putting a bunch of plates on there). And you can reverse the direction of the bolt to have the low-profile head on the plate side if need be, although the *provided* fender washer will hit the top post when on the upper bolt. I have four of these, which, with the horns supplied with the rack, make it a one-size-per-horn system, which makes changeover really quick and easy. Built tough.
Date published: 2017-10-26
Rated 5 out of 5 by from Change Plate Storage Rack This was the final piece to get my plates organized. Bolted right on to my half rack. Very happy!
Date published: 2019-09-13
Rated 4 out of 5 by from Great fit for my half-rack and change plates I was debating between these and just the simple short channel pair. I would say that I'm glad I got these instead but they do take up a lot of real estate on my squat rack being doubles. With that said I knew I wanted 4 pegs for smaller plates and accessories so this fit the bill (even if I had to buy 2). Would be great if they sold these in pairs :D Also, I knew I wouldn't be moving the area I store my change plates, fractional plates, and collars so it works out in my case for buying the bolt on ones (instead of the pins). Keep in mind that the bolts used to attach to the rig actually bump up against the weights (so you can't push them flush) but I'm fine with that since I'm actually storing extra collars in the back so those don't actually hit the bolt heads due to how they hang. If you are ONLY storing change plates though they will hit the bolt heads.
Date published: 2020-08-02
Rated 5 out of 5 by from Need the Place to Hold I needed a holder for the 2 1/2’s, 5’s and 10’s. I bought two of these and put them on the sides of my R-2. These are great for holding those smaller weights. I placed them low on the rack to keep the plates out of the way when I’m training, and off the floor for safety. Built strong and easily attached.
Date published: 2019-05-04
Rated 5 out of 5 by from perfect fit Exactly what it looks like. Allowed me to store 2.5lb and 5lb plates on my half rack in a convenient spot that both me and my wife can reach.
Date published: 2020-03-07
Rated 4 out of 5 by from Nearly perfect I love how this saves me a bit of space for the smaller plates. Easy to install but it does bug me a little bit. The attached photo should help - the top bolt is just in a weird place. Since the plates up there aren't flush, they clang a lot whenever you bump the rerack. A minor inconvenience, but a constant reminder as well. Otherwise the value is great!
Date published: 2020-08-24
  • y_2020, m_9, d_21, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_XX13575, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_roguecanada