No Customs Fees!

Ships from USA & Rogue Pays Customs Fees Learn More

Rogue 10KG Junior Bar

$254.00 CAD

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Bar Type Junior Bars
Bar Use Technique
Bar Weight 10KG
Diameter 25MM
Knurl Multi
Center Knurl No
Knurl Mark Dual
Shaft Coating Black Zinc
Loadable Sleeve Length 6.625"
Sleeve Coating Bright Zinc
Bushing/Bearing Bushing
F Rating™ F6-R
Tensile Strength 190,000 PSI
Guarantee/Warranty Construction

Rogue 10KG Junior Bar

Fully machined and assembled in Columbus, Ohio, the Rogue 10KG Junior Bar is a beginner’s/technique barbell manufactured with the same quality and precision as our standard competition bars.

The latest version of the Junior Bar includes a 25MM, 190,000 PSI tensile strength shaft with dual knurl marks for both Olympic and powerlifting, no center knurl, and a black zinc coating. The bright zinc sleeves are cut short with a loadable length of 6.625", while the distance between the collars is a competition standard 52-3/16”. This unique design makes the Junior Bar ideal for the beginning lifter--male or female, young or old--allowing them to load the bar with durable plates and train exactly as they would with a full-weight bar. The reduced sleeve length keeps the overall weight low, 11LB less than a women's bar and half the weight of a men's bar, while the collar spacing makes the bar conveniently rackable on any standard power rack.

The Junior Bar is built with quality bronze bushings and a snap ring design comparable to our original Rogue Bar and Bella Bar. If you want a beginner's or youth barbell that delivers the durability and reliable spin of the best bars in the industry, this is your choice.

See More: Barbells Available at Rogue.

Specifications:

  • Manufactured in Columbus, OH
  • 190,000 PSI tensile strength steel
  • Diameter: 25MM
  • Overall Length: 66.80”
  • Loadable Sleeve Length: 6.625"
  • Distance Between Collars: 52.18”
  • Bronze Bushings
  • Snap Ring Construction
  • Dual Knurl Marks w/ No Center Knurl
  • Finish: Black Zinc shaft + Bright Zinc sleeves

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Bar Type Junior Bars
Bar Use Technique
Bar Weight 10KG
Diameter 25MM
Knurl Multi
Center Knurl No
Knurl Mark Dual
Shaft Coating Black Zinc
Loadable Sleeve Length 6.625"
Sleeve Coating Bright Zinc
Bushing/Bearing Bushing
F Rating™ F6-R
Tensile Strength 190,000 PSI
Guarantee/Warranty Construction

F Scale™
The F Scale™ is a durability scale for barbells based on functional testing at stresses similar to what barbells experience when being dropped from overhead. Bars that have been treated with Rogue Work Hardening (RWH™) are designated by having an R in their F Rating™. For more information on F Scale™ click here.

Oxidation Rate
The resistance of a barbell to oxidation depends on the type of steel and the coating. Barbells at the lower end of the spectrum will require more care and maintenance to preserve their appearance than barbells at the upper end of the spectrum.

Rogue 10KG Junior Bar is rated 4.9 out of 5 by 62.
Rated 5 out of 5 by from Great addition for the home gym! Great quality! Great for many different uses. Among other things, this barbell provides an easy way to teach beginners/young lifters.
Date published: 2021-07-19
Rated 5 out of 5 by from Quality piece Exactly what I anticipated from Rogue, once you can get the equipment from Rogue, it’s always great. This bar took 14 months to get it. Worth the wait? I’m not so sure.
Date published: 2021-07-12
Rated 5 out of 5 by from Worth the Wait ! Iv waited since COVID first shut everyone down for this bar and it’s definitely worth the weight !
Date published: 2021-07-05
Rated 5 out of 5 by from Top quality Super high quality construction, just like the full size bars. Great for kids and just for a lightweight training bar. Highly recommended to have in a family home gym.
Date published: 2021-06-12
Rated 5 out of 5 by from Update with tips Per my original review, I bought this bar for warm-ups. Well, given a new toy, a guy just has to play. Here is what I found out: When doing bench presses, I had a hard time seeing the rings to setup my grip. My regular bar is the stainless steel 20 KG Ohio Power - if it wasn't sinful to pray to a barbell, I would worship that bar as a god. My solution for the black zinc 10 KG bar was to clip a couple of USB rechargeable cap lights into the Monster rack about 5 holes below my J-cups. The other observation concerns loadable sleeve & whip. I setup this bar for a rack pull with 250# of 6-shooters (4x45# + 2x35#) with 2" collars. (You could go heavier with thinner plates.) With my hands touching in the middle of the bar (which I did just to check the whip), there was noticeable whip - nothing extreme; just noticeable. It takes 400#+ to get the same feel from my black zinc deadlift bar. As far as my deadlift bars ring visibility is concerned, I only use that bar for deadlifts and bent-over rows, my setup is keyed off the center of the bar, not the outer rings; also, my gym lights are overhead so, on the bench, I am looking up toward them with the bottom of the bar shaded while the opposite is true for deadlifts and rows.
Date published: 2021-06-07
Rated 5 out of 5 by from Exactly what I wanted A couple of years ago, I attended a wedding reception hosted on multiple floors of a historic hotel in Chicago. As elevator space was sparse, my niece and I dashed down a dimly lit stairwell. I thought that I had reached a landing; but, I did not; I fell with the majority of my 300# weight landing on my left shoulder. It took a lot of rehab just to get back to full extension. When I was ready to do barbell work again, I used bands, dumbbells, and a PVC pipe as part of my shoulder warm-up routine. None of which do a good job of emulating a barbell. This bar is ideal for that purpose. Once upon a time, I deadlifted 600#; and, I have everything I need to attempt that feat again. But, to paraphrase a Meatloaf song, "Lifts in the rear view mirror may appear closer than they are." This 10KG acknowledges my current reality; and, I love it. While I lean heavily toward function/essence over appearance, this bar matches my black zinc deadlift bar; a nice plus.
Date published: 2021-04-08
Rated 5 out of 5 by from No brainer purchase My son is 12 and a technique bar isn’t enough anymore and mom’s Bella bar is a little too long. I jumped on this when I saw it and am glad I did. Very reasonably priced compared to a few competitors. My son loves the bar, decent spin and its like a c-70 and Bella bar had a baby. I’ve noticed my son being more confident in his lifts and it will last for a long time or be passed down to his younger sister as moves up in bars. My wife also uses it for accessory work and other lifts. Overall well rounded bar that the entire family can use. A+
Date published: 2021-03-19
Rated 5 out of 5 by from Quality item, as always! Perfect to lead the little love ones ! (Unable to load picture - too large)
Date published: 2021-03-19
  • y_2021, m_8, d_3, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_62
  • loc_en_US, sid_RA0713-BLBR, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_roguecanada