Live Chat

Rogue 29mm Stump Bar

★★★★★
★★★★★
5
5 Reviews
Made in U.S.A.

Rogue 29mm Stump Bar

★★★★★
★★★★★
5
5 Reviews
Made in U.S.A.
CA$470.00
Product Description
Gear Specs
Shipping
Product Description

Rogue 29mm Stump Bar

The Rogue Stump Bar is a rackable, short-sleeve version of our stainless steel Ohio Power Bar, built with the same 29mm diameter, little-to-no flex shaft (200,000 PSI), bronze bushings, and aggressive knurl pattern (in single powerlifting knurl marks + center knurl). Though the shorter sleeve length (7.3125” vs 16.25”) reduces its potential weight loads, the 30 LB Stump Bar is ideal for home gym owners who train in tight quarters and/or don’t need full-length sleeves for their powerlifting movements. With thinner plates such as our USA Olympic Plates or Calibrated LB Steel Plates the Stump can still be loaded to over 500LBs.

Each bar is manufactured in the USA and rated as an F4 in our F-Scale durability testing. The stainless steel delivers both superior oxidation resistance and an accurate feel of the intended knurl, as no additional coating affects the original precision-machined pattern. For the sleeves, we used a new proprietary, matte-black finishing process that transforms the surface of the steel rather than coating it, greatly increasing the sleeves’ long-term corrosion resistance and color endurance. 

Please Note: Rogue recommends using a synthetic bristle brush, NOT a steel brush, to clean a stainless steel shaft. Steel on steel can cause rusting over time. See more tips here: Bar Care & Maintenance.

Read More

Rogue 29mm Stump Bar

The Rogue Stump Bar is a rackable, short-sleeve version of our stainless steel Ohio Power Bar, built with the same 29mm diameter, little-to-no flex shaft (200,000 PSI), bronze bushings, and aggressive knurl pattern (in single powerlifting knurl marks + center knurl). Though the shorter sleeve length (7.3125” vs 16.25”) reduces its potential weight loads, the 30 LB Stump Bar is ideal for home gym owners who train in tight quarters and/or don’t need full-length sleeves for their powerlifting movements. With thinner plates such as our USA Olympic Plates or Calibrated LB Steel Plates the Stump can still be loaded to over 500LBs.

Each bar is manufactured in the USA and rated as an F4 in our F-Scale durability testing. The stainless steel delivers both superior oxidation resistance and an accurate feel of the intended knurl, as no additional coating affects the original precision-machined pattern. For the sleeves, we used a new proprietary, matte-black finishing process that transforms the surface of the steel rather than coating it, greatly increasing the sleeves’ long-term corrosion resistance and color endurance. 

Please Note: Rogue recommends using a synthetic bristle brush, NOT a steel brush, to clean a stainless steel shaft. Steel on steel can cause rusting over time. See more tips here: Bar Care & Maintenance.

Gear Specs

Specifications:

  • Made in the USA
  • Loadable Sleeve Length: 7.3125"
  • Bar Length: 68.3125"
  • Weight: 30LB
  • Stainless Steel Shaft
  • Proprietary Matte Black Sleeve Finish
  • Aggressive knurling for powerlifting
  • Center knurl for added “stick” to the back during squats
  • 29MM Diameter and 200,000 PSI tensile strength for greater rigidity and reduced whip
  • Bronze Bushings and Snap Ring Design for smooth spin
  • Rogue branded endcaps
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Frequently Bought Together

Pricing for All 3 Items

Total Price
CA$557.00

Gear Specs

BrandRogue Fitness
ColorSilver / Black
Guarantee/WarrantyLifetime Warranty*
Made In USAYes
Loadable Sleeve Length7.3125"
Bar Length68.3125"
Diameter29MM
F Rating™F4
Bushing/BearingBushing
Bar Weight30LB
KnurlPowerlifting
Center KnurlYes
Knurl MarkPowerlifting
Shaft CoatingNone - Stainless Steel
Sleeve CoatingProprietary Matte Black Finish
Tensile Strength200,000 PSI

Key Features of the 29MM Stump Bar

1

A Short But Rackable Power Bar

The Stump Bar is a space-saver and a game-changer for gym owners who want the feel, function, and rackability of a standard power bar, but don’t need the maximum loadable sleeve length. At a total length of 68.3125”, this bar is roughly 18” inches shorter than the Ohio Power Bar, and weighs 15 LBS less unloaded (30 LB vs 45LB). However, with a standard 29mm diameter shaft, powerlifting knurl marks, and rack-compatible sleeve spacing, the Stump Bar allows athletes to train exactly as they would with a full-length bar. Ample space is saved, and only the plate load potential is reduced.

2

200,000 PSI Tensile Strength

The 29mm diameter steel shaft has a tensile strength of 200,000 PSI, same as our full-length Ohio Power Bar. This means it has superior rigidity and virtually zero whip/flex. Machined and assembled in Columbus, Ohio, the Stump Bar also features a snap-ring design and quality bronze bushings for a smooth, consistent feel. Its rating of F4 in our F-Scale durability testing is twice that of the full-length Ohio Power Bar, as the shorter sleeves reduce the effect of each impact on the bar.

3

Aggressive Knurl

The bar includes single powerlifting marks and a center knurl, each featuring a deep, coarse pattern that produces a reliable grip / stick without being sharp or abrasive. Perfecting this knurl pattern is both a science and an art. Every bar shaft is machined in Columbus on new Haas machines (built in the USA) and fine-tuned and personally tested by the Rogue team.

4

Finishing Touches

Each Stump Bar features a stainless steel shaft and a proprietary matte black sleeve finish. Stainless steel knows no rivals when it comes to oxidation resistance, and it’s also excellent for maintaining the original intended feel of the knurl. Our new sleeve finishing process is also uniquely effective, transforming the surface of the steel rather than coating it, greatly increasing the long-term corrosion resistance and color endurance of the matte black finish.

F SCALE™

The F Scale™ is a durability scale for barbells based on functional testing at stresses similar to what barbells experience when being dropped from overhead. Bars that have been treated with Rogue Work Hardening (RWH™) are designated by having an R in their F Rating™. For more information on F Scale™ click here.

OXIDATION RATE

The resistance of a barbell to oxidation depends on the type of steel and the coating. Barbells at the lower end of the spectrum will require more care and maintenance to preserve their appearance than barbells at the upper end of the spectrum.

*Warranty against bending does not cover any bar which has been damaged due to negligent or faulty use, alteration, maintenance, storage or handling by the user. Negligent or faulty use includes abusive dropping of the bar (i.e., dropping the bar on a box, bench, spotter arms or pins in a power rack, excessive dropping with insufficient or damaged bumpers, or excessive dropping with iron plates, and similar usage). Any specific issues regarding a Rogue product with which a customer is not satisfied will be reviewed on a case-by-case basis. We have found that most problems with bars we replace are related to abusive use rather than manufacturing or materials issues.

Recommended Products

Reviews

1 - 5 of 5 Reviews
jossbur
Monterrey, MX
★★★★★
★★★★★
March 30
Great home gym barbell
I just got this one, I love the aggresive knurling, and the size is perfect for my limited space.
Originally posted on roguefitness.com
Rogue rat
★★★★★
★★★★★
February 15
YES 29MM MAKES A DIFFERENCE!
I own the Ohio bar and c70s and they're both fantastic bars. Ohio is my overhead bar and c70s is my Olympic lifting machine! I'm lifting 5 years now and need a more serious bench and squatting bar now. I weigh in the 150s and I'm benching in the 250s now and the bar whip with 28.5mm hybrid bars is becoming an issue for me. My right hand has been getting a little sore when benching heavy recently. I tried shifting my hand position a little but that was little help...it turns out every time the bar flexed it hurt my hand a little...ENTER THE SOLUTION ...THE NEW 29mm STUMP BAR!!! Upon unracking I noticed not only was the knurling much grippier but the bar diameter was larger. That half millimeter actually made a difference in my palm..A LOT! There was no pain or reason to shift my hands now. It felt great! There's no noticeable whip and I can bench fast and heavy and I feel like I have more power and bleeding less energy with no whipping going on. (I do have the earthquake MAXX bar and if i want whip I'll play with that) Squatting will have to wait a few days but the Ohio slips on my back and hurts my wrists when that happens. This center knurl will take care of that! I just got the bar a few hours ago and was very excited to review this new Rogue creation that sold out right away. Order yours, it's the ultimate home gym power bar. Happy Valentine's day 2022!
Yes, I recommend this product
Originally posted on roguefitness.com
Dogtown WV
Brambleton, VA
★★★★★
★★★★★
February 13
Perfect bar for the majority.
What I love: It's rackable, space efficient, made in the USA, stainless steel shaft with great knurling, holds enough poundage for most people, and close your eyes when in use and you won't feel any difference between a full length olympic bar and the Stump bar. A full-size olympic bar is simply unnecessary when you have an option like this. My ego said you need the full size olympic bar, but the reality is this type of bar could easily become the new standard for home gyms. What I dislike about this bar: Nothing.
Yes, I recommend this product
Originally posted on roguefitness.com
Turk182
Largo Florida
★★★★★
★★★★★
February 13
Perfect compromise
I bought this bar just a couple weeks ago. I have a Rogue C-70S bar also which is a great bar also. If I could write the specs for my ideal bar this would be it. Stainless steel, rackable, aggressive knurling, power bar diameter and center knurling. I am in my sixties and don’t lift the weight I used to. I can easily get 300 lbs on the bar even with Rogue deep dish and still have room for a collar. My weight room is in a 12x16 bedroom so space is at a premium. Between the collars this bar is exactly like the Rogue Ohio power bar. If your an old power lifter and don’t need to put more then 300 lbs on the bar anymore don’t hesitate to buy it. Quality is top notch!
Yes, I recommend this product
Originally posted on roguefitness.com
Georedgealfa
Houston
★★★★★
★★★★★
February 9
Excellent Advantage and Fine Tuner
Loved working with it so far. I am taking it to the next level. Thanks, Scott H.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery