SHIPPING DELAY: 5-7 DAYS.
Online orders and operations are active. Retail store is closed. | Covid-19 Status
No Customs Fees!

Ships from USA & Rogue Pays Customs Fees Learn More

Rogue Kettlebell - E Coat

KB-9LB Rogue Kettlebell - E Coat
$35.00 CAD
KB-13LB Rogue Kettlebell - E Coat
$49.00 CAD
KB-18LB Rogue Kettlebell - E Coat
$55.00 CAD
KB-26LB Rogue Kettlebell - E Coat
$62.00 CAD
KB-35LB Rogue Kettlebell - E Coat
$76.00 CAD
KB-40LB Rogue Kettlebell - E Coat
$83.00 CAD
KB-44LB Rogue Kettlebell - E Coat
$90.00 CAD
KB-53LB Rogue Kettlebell - E Coat
$97.00 CAD
KB-62LB Rogue Kettlebell - E Coat
$110.00 CAD
KB-70LB Rogue Kettlebell - E Coat
$131.00 CAD
KB-80LB Rogue Kettlebell - E Coat
$138.00 CAD
KB-88LB Rogue Kettlebell - E Coat
$158.00 CAD

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

Material Ductile Iron Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
Finish E-Coat Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss ~22 GU Rating These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Fast Rogue Shipping
Your kettlebell(s) will be packaged safely and efficiently, and you’ll be able to follow the progress of your order from our factory floor to your door using the online Rogue Shipping Tracker.

Specifications:

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
  • Approved for US Army Combat Fitness Test (40LB KB)

See More: Kettlebells Available from Rogue

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight 9LB to 88LB
Length Varies by weight
Width Varies by weight
Height Varies by weight
Other Product Specs Black E Coat finish
Handle Diameter 9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"

Key Features of the Rogue Kettlebell - E-Coat

  • 1Made in the USA - Cast in Cadillac

    The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

  • 2Ductile Iron

    All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

  • 3E-Coat Finish

    This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

  • 4Gloss & Branding

    Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

  • 5Wide Selection

    Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
    Rogue E-Coat Kettlebell Handle Diameters:
    9LB - 18LB: 1.2"
    26LB: 1.4"
    35LB - 88LB: 1.5"

  • 6Approved for ACFT

    The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Rogue Kettlebell - E Coat is rated 4.8 out of 5 by 322.
Rated 4 out of 5 by from Quality product Rogue you know the name of the stamp of quality and everything they make but if I do have to give a critique it is this I really prefer kettle bells that have a thinner handle makes it a whole lot smoother in all the movements and secure grip that being said it was worth the money.
Date published: 2020-11-17
Rated 5 out of 5 by from England Armwrestling Championships 2019 Amateur I love this Ketties ) help to training ! good quality ! Love Rogue !
Date published: 2020-11-16
Rated 5 out of 5 by from The exact kettlebell I was looking for! I've had the 40 lbs kettlebell for over a month and with the gyms being closed, I've been able to use it for concentration curls and shoulder presses. I've also been able to perfect the kettlebell clean movement. The 40 lb KB has been a great addition to my fitness routine at home!
Date published: 2020-11-14
Rated 4 out of 5 by from Good looking kettlebell I bought fhe e-coated 53 lb kettlebell. It’s great looking and is well balanced, made well, and I enjoy how it feels, especially when held in the “rack” position. The only thing I wish is that the handle was a little wider to fit both hands more comfortably for two handed swings.
Date published: 2020-11-14
Rated 5 out of 5 by from Great kettlebell Another awesome American made product from Rogue. Great look, great feel, very durable. High quality. No complaints.
Date published: 2020-11-11
Rated 5 out of 5 by from Great Purchase Does exactly what it should do. Easy to grip, looks great, feels like a quality product. Can sometimes feel a little too heavy, especially if I’m feeling lazy ;)
Date published: 2020-11-10
Rated 5 out of 5 by from Nice Kettlebell, E Coat is a little slick If you do kettlebell specific programs like Simple & Sinister you're going to be spending a lot of time time with your kettlebell so I appreciate one that is well designed, looks good, and is made in the USA. With the 40KG the E Coat is a little slick for my liking even with chalk. I went ahead and sanded the handle down to bare iron as I usually do with all my kettlebells and it's good to go!
Date published: 2020-11-09
Rated 5 out of 5 by from Well balanced including the finish! I have purchased a lot of fitness equipment in my time, but this is the first kettlebell. I never thought that design and finish would have a real impact on a piece of metal with a handle. Like I said I don't have a lot of experience purchasing let alone gym usage (I think I used it for 1 exercise), but the low/compact profile of the bell makes it smooth through the variation of movements I do now...and the finish??? Well that e-coat makes for a nice/sturdy grip, even when the hands get wet with sweat. As always, the R&D guys at Rogue are looking to improve every aspect of YOUR workout. #yougetwhatyoupayfor
Date published: 2020-11-09
  • y_2020, m_11, d_26, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_322
  • loc_en_US, sid_USC001, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_roguecanada