Rogue RM-4 Monster Rack 2.0 - Charcoal

★★★★★
★★★★★
5
1 Review
Made in U.S.A.

Rogue RM-4 Monster Rack 2.0 - Charcoal

★★★★★
★★★★★
5
1 Review
Made in U.S.A.
CA$2,860.00

Height*

Gear Specs

BrandRogue Fitness
ColorCharcoal Gray
Made In USAYes
Length49"
Width49"
Height90.375" or 100.375"
Foot Print53" x 53"
Steel Notes3x3" 11 Gauge Steel
Product Description

The RM-4 Monster Rack 2.0 is available here in a special edition Charcoal colorway with some of our most popular Monster add-ons included. The distinctive, textured charcoal gray upright finish has long been a favorite of the Rogue team in our custom installations, and it’s now being offered to the general public for the first time in this limited run, combined with a loaded line-up of accessories, including:

The Monster Strap Safety System 2.0 - Made from 3" wide reinforced nylon, safety-rated for 10,000 LBS, with 0.3125" thick brackets (MG Black) and a 1" diameter pin. The front and back ends of the strap hangers can be mounted at different heights, allowing a dropped bar to roll safely away from an athlete on a missed lift. 

1” Ghost Roller J-Cups 2.0 - A patented conical roller (composite) and multi-radius concave receiver ensure each racked bar (25mm-50mm in diameter) safely returns to the front of the J-cup in an optimal position for the next lift. Includes fully welded, reinforced pin with a complete channel, plus UHMW linings to protect both the rack and the bar. Texture black finish.

Laser-Cut Rogue Nameplate - Available here in an exclusive black-on-black format with a texture black nameplate + branding plate and medium gloss black backers. Along with creating a fantastic look above the charcoal uprights, this feature also adds extra lateral stability to the unit, as well.

The Charcoal RM-4 is manufactured in the USA and features 3x3” 11-gauge steel uprights (90” or 100”). The included crossmembers, 43” single pull-up bar, Monster band pegs, and hardware are finished in black, and (2) Rogue Monster 1.5" Wrenches are provided for set-up. The complete unit occupies just a 53” x 53” footprint.

Important: Unit must be bolted to floor unless stabilizer is added. Mounting Hardware Not Included.

Read More

Rogue RM-4 Monster Rack 2.0 - Charcoal

The RM-4 Monster Rack 2.0 is available here in a special edition Charcoal colorway with some of our most popular Monster add-ons included. The distinctive, textured charcoal gray upright finish has long been a favorite of the Rogue team in our custom installations, and it’s now being offered to the general public for the first time in this limited run, combined with a loaded line-up of accessories, including:

The Monster Strap Safety System 2.0 - Made from 3" wide reinforced nylon, safety-rated for 10,000 LBS, with 0.3125" thick brackets (MG Black) and a 1" diameter pin. The front and back ends of the strap hangers can be mounted at different heights, allowing a dropped bar to roll safely away from an athlete on a missed lift. 

1” Ghost Roller J-Cups 2.0 - A patented conical roller (composite) and multi-radius concave receiver ensure each racked bar (25mm-50mm in diameter) safely returns to the front of the J-cup in an optimal position for the next lift. Includes fully welded, reinforced pin with a complete channel, plus UHMW linings to protect both the rack and the bar. Texture black finish.

Laser-Cut Rogue Nameplate - Available here in an exclusive black-on-black format with a texture black nameplate + branding plate and medium gloss black backers. Along with creating a fantastic look above the charcoal uprights, this feature also adds extra lateral stability to the unit, as well.

The Charcoal RM-4 is manufactured in the USA and features 3x3” 11-gauge steel uprights (90” or 100”). The included crossmembers, 43” single pull-up bar, Monster band pegs, and hardware are finished in black, and (2) Rogue Monster 1.5" Wrenches are provided for set-up. The complete unit occupies just a 53” x 53” footprint.

Important: Unit must be bolted to floor unless stabilizer is added. Mounting Hardware Not Included.

Gear Specs

Specifications

  • Made in the USA
  • 3x3” 11-Gauge Steel - 90” or 100” Height
  • NEW Textured Charcoal Gray Upright Finish
  • Textured Black Crossmembers
  • 1” bolts and fasteners - IL Black
  • Footprint: 53” x 53”
  • Rogue Nameplate - Texture Black crossmember and laser-cut Rogue branding, MG Black backers
  • (1) 43” Monster Single Pull-Up Bar - Textured Black
  • (2) Ghost Roller J-Cups - Textured Black
  • (2) Monster Strap Safeties - Med Gloss Black
  • (4) Band Pegs - IL Black


Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Key Features of the Rm-4 Monster Rack 2.0

Limited Edition with Premium Add-Ons
1

Limited Edition with Premium Add-Ons

This limited edition of the RM-4 Monster Power Rack is inspired by a colorway and configuration used in some of our favorite custom installations, with top-tier Monster accessories included. As with the standard edition, the Charcoal RM-4 is Made in the USA using 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. The complete unit occupies just a 53” x 53” footprint, and the keyhole pattern on the sides of each upright creates compatibility with more of our exclusive Monster add-ons and attachments.

New Charcoal Upright Finish
2

New Charcoal Upright Finish

This special edition of the RM-4 introduces a new textured charcoal gray upright finish, which we’ve combined with a black pull-up bar, crossmembers, band pegs, strap brackets, and J-cups (plus black hardware) for a very distinct look. The charcoal colorway is one we’ve used in custom installations with great, long-lasting results, and it’s available here to the public for the first time in a limited run. This rack is available in a pre-set configuration with either 90” or 100” uprights. To select different colorways, dimensions, or base components, see our standard RM-4 Monster Rack 2.0 page.

Ghost Roller J-Cup Pair
3

Ghost Roller J-Cup Pair

The Ghost Return Roller J-Cup 2.0 can comfortably accommodate barbell shafts ranging from 1” (25 MM) to 2” (50 MM) in diameter. The compact design makes it less likely that an athlete will make accidental contact with the J-cups when benching or squatting, and the roller feature enables much safer and easier centering of the barbell prior to lift off. Included here with a composite roller and a textured black finish. Rackable Depth: 2.875".

Exclusive Nameplate Colorway
4

Exclusive Nameplate Colorway

This laser-cut, Rogue-branded plate features an exclusive black-on-black format with a texture black nameplate + branding plate and medium gloss black backers. Along with creating a fantastic look above the Charcoal uprights, this feature also adds extra lateral stability to the unit, as well.

Monster Strap Safety System 2.0
5

Monster Strap Safety System 2.0

These 3" wide reinforced nylon straps are designed to prevent damage to barbell knurling on any missed lift, or to roll the bar safely away from the user on a drop. Rated for 10,000 LBS. A notched pin design securely locks the system into place and allows for easy, quick adjustments. Available here with an MG Black bracket finish.

4 Monster Band Pegs
6

4 Monster Band Pegs

Monster Band Pegs are manufactured in-house by machining two pieces of carbon steel (cap and post) to exacting tolerances and then assembling. The machined, chamfered cap provides a sleek, low profile design, allowing for the easy and secure attachment of bands for greater resistance during squats, deadlifts, bench pressing, etc. The pegs can also be used as a clean and sturdy hook for hanging items off the top of a rack, including bands, chains, and other accessories.

Loading

EXPLORE MONSTER ATTACHMENTS

Recommended Products

Reviews

1 - 1 of 1 Reviews
StingRey7
Arizona
★★★★★
★★★★★
1 week ago
Rogue RM-4, very sturdy, reliable and solid
2017 I started working out at a CrossFit gym across the street from my startup and became aware of Rogue products. However the open gym hours simply didn’t work well with my time and after a year in 2018 I purchased my own simple setup to simply stop missing workouts when I inevitably had to work late. I went with the Monster series as I really liked ease of having numbered wholes and 2” spacing was good enough for me. I’ve had this setup for six years and it still feels great like day one. A few odd scratches here and there but it’s to be expected as it is used frequently. After a while I simply stopped going to commercial gyms simply because all their equipment felt inferior to my home gym. That is the one con of getting a Monster setup, absolutely nothing will ever compare and you’ll want to workout with equipment on par with the best. My equipment has never failed me and I highly recommend it. It’s made in the USA and it gives me great pleasure to know Rogue is putting American quality back on the world stage.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery