Rogue Monster Plate Storage Pin

★★★★★
★★★★★
4.8
42 Reviews
Made in U.S.A.

Rogue Monster Plate Storage Pin

★★★★★
★★★★★
4.8
42 Reviews
Made in U.S.A.
CA$86.00

Mount*

Length*

Pack Size*

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Length6.75" or 12.75" (loadable length)
Diameter1.9"
Steel NotesProprietary Matte Black finish
Other Product SpecsMachined Acetal Plastic Post with steel core
Product Description

Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.

The Monster Plate Storage Pin is available in two styles (Keyhole and Keyless) and two lengths (6.75” or 12.75” loadable length). All versions are intended exclusively for use with  Rogue Monster Series power racks, rigs, and wall-mount units, and are NOT compatible with our Infinity or Econ lines. You can order your Monster Pins in a multitude of package options: single, pair, 4-pack, or 8-pack.

Read More

Rogue Monster Plate Storage Pins

Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.

The Monster Plate Storage Pin is available in two styles (Keyhole and Keyless) and two lengths (6.75” or 12.75” loadable length). All versions are intended exclusively for use with  Rogue Monster Series power racks, rigs, and wall-mount units, and are NOT compatible with our Infinity or Econ lines. You can order your Monster Pins in a multitude of package options: single, pair, 4-pack, or 8-pack.

Patented

Gear Specs

Specifications:

  • Made in the USA
  • Bumper Plate Storage Posts - Exclusively for Rogue Monster Series Racks & Rigs
  • Available Individually, in Pairs, or as 4-pack or 8-pack
  • Post Diameter: 1.9"
  • Post Lengths: 6.75" or 12.75" (loadable length)
  • 12.75” Pin Capacity: 180LB of bumpers and up to 540LB of steel plates.
  • 6.75” Pin Capacity: 180LB of steel plates / Ideal for storing your change plates and smaller increments of steel.
  • Machined Acetal Sheath
  • Acetal Washers
  • Keyhole and Keyless options
  • Threaded Nut comes standard for tightening (optional Knurled Knob also available)
  • Metal Finish: Proprietary Matte Black
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

THE TWO STYLES OF MONSTER STORAGE PIN:

Keyhole Pin: 

Includes a specialized nub for installation into the keyholes of a Monster rack/rig. NOT compatible with standard 1” holes.

Keyless Pin (no nub): 

Designed to be compatible with the keyholes AND the standard 1” holes of a Monster rack/rig.

New Design Note: All metal parts of the post, regardless of the size and variation, now include our premium Proprietary Matte Black finish.

Threaded Post w/ Acetal Cover
1

Threaded Post w/ Acetal Cover

Consists of a 1" diameter threaded pin and 1.9" OD machined Acetal plastic sheath. Acetal is a high-end thermoplastic material noted for its light weight, low-friction, and wear-resistant qualities. It offers a unique combination of strength, rigidity, and dimensional stability beyond that of traditional plastic coatings, not to mention a more consistent, uniform appearance. We've also included (2) Acetal Washers that sandwich each side of the upright to keep the powder-coat protected from any damage.

Keyhole & Keyless Options
2

Keyhole & Keyless Options

Customers can choose between our standard Keyhole Pin, which features a machined nut with a special nub designed to fit the keyhole of our Monster racks; or a Keyless variation, which is designed to fit the keyholes AND the standard 1” holes of a Monster rack. Both versions are made to ensure a tight fit that won’t allow sagging or spinning even when the post is fully loaded.

Choice of Threaded Nut or Knurled Knob
3

Choice of Threaded Nut or Knurled Knob

The storage pin comes standard with a machined nut that goes through the threaded end of the post, on the opposite side of the upright from where the plates are stored. Users can tighten this nut with one of our 1" Monster Wrenches (these wrenches come standard with our Monster Racks but can also be Purchased  a la carte). As an alternative, customers can also opt to purchase our new Monster Knurled Knob, which enables the adjustment of the post’s height WITHOUT the need of a wrench or other tools. Available as a single or a pair, this patent pending machined knob includes an acetal insert on one side (to protect the customer’s uprights) and a knurled outside surface with a black zinc finish. It measures 2.125" in diameter, weighs 0.57 LBS, and is compatible ONLY with our 1" threaded pins (or 1" hardware).

Recommended Products

Reviews

1 - 8 of 42 Reviews
JP Bb
★★★★★
★★★★★
January 15
Organization is everything!!
I recently purchased an additional two pegs on top of the six I already had to complete full storage of all my plates on the back of my rack. I didn’t realize how much easier it is to have everything up off the floor and properly organized. The plate storage is a bit expensive relative to other products at Rogue but they are top quality.
Helpful?
Yes · 0
No · 0
stozwald
★★★★★
★★★★★
October 12
Great accessory
It’s dumb how much these cost, but I still love them and would buy again. Clever “nuts” keep you from over-torquing, and the post is pleasantly bump-damping and low-friction.
Originally posted on roguefitness.com
NAS1
SC
★★★★★
★★★★★
August 29
Good but pricey
Eaay to remove and replace plates, stable, mounts easily without the keybole feature, only holds four 45lb plates for the 6" with maybe 3/8" to spare. Wish they made an 8" option and they are prety expensive for what they are for a 4 pack. Ive had no issues with sagging.
Yes, I recommend this product
Originally posted on roguefitness.com
SLG45
Midwest
★★★★★
★★★★★
July 16
Best plate storage
Best rack mounted plate storage I have used. Smooth and durable. I do wish they came in 4", 8" and 12" though. My smaller plates don't need 6", and my larger plates need more, but 12" just sticks out more than I would like.
Yes, I recommend this product
Originally posted on roguefitness.com
2Chainz
★★★★★
★★★★★
June 9
Sturdy and Customizable Plate Storage Option
Sturdy and smooth for sliding plates on and off. They are able to be tightened down with the monster wrenches that came with my collegiate rack. They can easily be moved around which allows for many different layouts.
Yes, I recommend this product
Originally posted on roguefitness.com
sanders231
Oklahoma
★★★★★
★★★★★
April 20
Works with REP!
I recently bought a REP 5000 PR and instead of buying storage horns from REP I ended up getting these. They do fit my rack (1 inch holes). They look better also. Only down side is they’re expensive,,
Yes, I recommend this product
Originally posted on roguefitness.com
R P M
NE Oregon
★★★★★
★★★★★
April 4
Works great
The work great. One thing I was uncertain about was how tight to go with the wrench. Are they designed for some torque, or is hand-tight optimal? I went easy and nothing sags…just wasn’t sure.
Yes, I recommend this product
Originally posted on roguefitness.com
EC101
★★★★★
★★★★★
March 27
Simple
Nice, clean and simple….. Wish they made it for the ML series. Had to return due to me not reading the description well enough.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery