Rogue FT-1 Functional Trainer

★★★★★
★★★★★
4.8
4 Reviews
Made in U.S.A.

Rogue FT-1 Functional Trainer

★★★★★
★★★★★
4.8
4 Reviews
Made in U.S.A.
Rogue FT-1 Functional Trainer
CA$8,920.00
Ships in 4-6 Weeks
Pick-up not available
43" Rack Storage Panel - Black Hardware
CA$230.00
Rack Storage Panel Hangers
CA$31.00
43" Monster Single Post Shelf
CA$172.00
43" Monster Single Post Kettlebell Shelf
CA$241.00
Rogue Monster Crown Pull-up Bar
CA$407.00
Monster Neutral Grip Solo Mount Pull-up Bar
CA$300.00
Monster 45 Degree Solo Mount Pull-up Bar
CA$300.00
Pulldown Handle Attachments
CA$41.00

Pulldown Type (9)*

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight1600LB
Length47" (depth)
Width90.5"
Height107.5"
Foot Print90.5" x 47"
Product Description

Rogue’s FT-1 Functional Trainer features (2) of our CT-1 Cable Tower stations linked together by (1) 43” Monster Crossmember at the bottom of the unit and (1) laser-cut Rogue branded Monster Nameplate Crossmember at the top. This modular, space-efficient unit was inspired by a configuration first devised by U.S. Navy Veteran and garage gym builder Nick Gills.

Read More

Rogue FT-1 Functional Trainer

Rogue’s FT-1 Functional Trainer features (2) of our CT-1 Cable Tower stations linked together by (1) 43” Monster Crossmember at the bottom of the unit and (1) laser-cut Rogue branded Monster Nameplate Crossmember at the top. This modular, space-efficient unit was inspired by a configuration first devised by U.S. Navy Veteran and garage gym builder Nick Gills. 

By combining storage shelves [available at additional cost] between two CT-1 cable columns, users are able to gain tons of storage with dual cables in a relatively small footprint [90.4” x 47”]. The unit can be configured with up to 4 shelves in different varieties (DBs, KBs, bumpers) on the 100” uprights.

The FT-1 Functional Trainer can be assembled as a standalone unit or attached to the back of an existing Monster Rack (with at least 100” uprights)*. As a Monster unit, the FT-1 can accommodate our 43” Monster Rack Storage Panels and all versions of our 43” Monster Single-Post Shelves. The front top crossmember also accommodates the addition of a Monster Crown Pull-Up Bar or Solo Mount Pull-Up Bar. Any of these attachments can be added to your order via the menu in the purchase area.

*Customers interested in a rack-mounted FT-1 should contact team@roguefitness.com for complete details on this set-up.

For similar configurations, see: 

  • CC-1 Cable Crossover: in which two CT-1 units are connected by 107.25” steel bridge and mounting brackets
  • Monster Cave - in which two CT-1 Towers can be combined with a Fold Back Rack in the center

Shipping Notice:  This product ships on an oversized skid that is not able to be delivered using a traditional liftgate. If you do not have a freight loading dock, additional measures may be necessary in order to deliver this unit.

Note: This product is made to order and all returns carry a 20% restock fee for the standard black colorway.  All sales are final for custom colors.

Gear Specs

Specifications:

  • Made in the USA
  • Stand-Alone Construction, 3x3” 11-gauge steel (Must be bolted to floor, mounting hardware not included) (Rack mounted version is available, will need to contact team@roguefitness.com for details.)
  • Product Weight: ~1600 LBS
  • Height: 107.5"
  • Foot Print: 90.5" x 47"
  • Two 250 LB Weight Stacks (10 LB increments) <2:1 ratio>
  • 6” Machined Aluminum Pulleys + UHMW covers
  • 1/4” Cable built to US Mil Spec for aircraft cable
  • 16 adjustable height positions
  • MG Black powdercoat finish
  • Plastic Covered Band Attachment Pegs at top and bottom of weight stack
  • Custom Black Carabiners
  • Texture Black Diamond Tread Footplate for Low Row Movements
  • Includes: Pair of single handle cable attachments
  • Laser Cut and Formed Shrouds with ROGUE branding to close off weight stacks for safety purposes.
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Key Features of the FT-1 Functional Trainer

2 CT-1 Cable Towers
1

2 CT-1 Cable Towers

These precision-built columns enable a wide range of cable machine exercises, including rows, curls, tricep pushdowns, cable crossovers, and more. Users can adjust the weight load via the 250 LB weight stack, which is broken into 10 LB increments with a 2:1 ratio. The single handle pulley assembly features a 180-degree swivel and can be quickly set up high or low depending on the workout, utilizing the knurled stainless steel adjustment handle. There are 16 different height adjustment settings on the 2x2 rail, and with acetal pads inside the handle assembly, users can easily move the swivel up and down without damaging the stainless slide tube.

Big Storage Potential, Small Footprint
2

Big Storage Potential, Small Footprint

The FT-1’s configuration was inspired by U.S. Navy Veteran and garage gym builder Nick Gills. It’s set apart by its modularity, as the incorporation of Monster uprights and crossmembers makes the unit compatible with a wide assortment of attachments and accessories, including our 43” Monster Rack Storage Panels and 43” Monster Single-Post Shelves. Effectively then, the FT-1 is equivalent in width and storage capacity to a Monster 4-tier storage rack, while simultaneously providing TWO fully functional cable pulley stations. Formed and welded steel adapter brackets set each of the CT-1s in this configuration at a 45-degree angle.

Quality Rogue Construction
3

Quality Rogue Construction

Each 3x3” 11-gauge steel CT-1 unit is manufactured at our Reflex Fitness facility in Iowa. Their 6” aluminum pulleys and 250 LB weight stack are both machined in-house, and the 1/4” cable itself is made to the same military specifications as aircraft cable; jacketed in nylon for superior flexibility and durability. The standard finish is a classic MG Black powdercoat. The FT-1 also comes standard with a pair of 43” Monster Crossmembers for connecting the two towers. The top crossmember includes an MG Black / Rogue Red Monster nameplate with laser-cut branding.

Recommended Accessories
4

Recommended Accessories

The FT-1 can have its storage potential maximized with the addition of 43” Monster Rack Storage Panels and/or 43” Monster Single-Post Shelves, which are available in the purchase area. The CT-1 Towers come standard with Leather Tricep Straps and plastic-covered Band Attachment Pegs, but are also compatible with our Grip Triangle, Tricep Push Down Attachment, and a wide array of Monster Resistance Bands. The front top crossmember can also accommodate the addition of a Monster Crown Pull-Up Bar or Solo Mount Pull-Up Bar.

Recommended Products

Reviews

1 - 4 of 4 Reviews
Katface
Phoenix AZ
★★★★★
★★★★★
Nov 2023
Great product, but you should know.
I bought this to add to my home gym. I love it, but assembly is no joke and the weight distribution is way off. So, just know that a 250lb stack is not close to 250lbs. That’s the only real complaint.
Yes, I recommend this product
Originally posted on roguefitness.com

Response from Rogue Fitness:

Nov 2023
Thank you for leaving a review of your FT-1. The team has reached out to learn more about what may going on with your unit, and get any issues resolved.
BigDave1107
Trenton, NJ
★★★★★
★★★★★
Nov 2023
Amazing, wish there was under just under 96”
Awesome unit. Rogue’s FT could crush the competition if they had a shorter version as well for Home Gym users where 8” ceilings are all too common and restrictive. Is there any plan to release a model that is less than 96”?
Yes, I recommend this product
Originally posted on roguefitness.com
zach97
Saint George, Utah
★★★★★
★★★★★
Jun 2023
Beast of a Machine
My wife and I gifted this to ourselves for Christmas last year, and I wanted to spend some time with it before I wrote a review. We just passed the six-month mark since purchasing and will cross the six-month mark of actual usage (shipping lead time) in July. The ability to perform virtually any cable movement at home has been a complete game changer for us. The Rogue FT-1 Functional Trainer will quite literally outperform most if not all functional trainers in even the best of gyms. Make sure that you have at least a few sets of hands on deck when this arrives at your doorsteps. It would be next to impossible to expect to assemble it on your own. Additionally, most if not all will need a forklift on hand to receive the machine to begin with. The oversized pallets are far too big to remove from the trailer it arrives on with just a pallet jack alone. However, Rogue explains all the necessary steps in your order confirmation emails. The lone modification I have made to the machine is the color of the nameplate. I used a sanding wheel on my grinder, and then painted the steel matte black.
Yes, I recommend this product
Originally posted on roguefitness.com
Veryhappy
Alabama
★★★★★
★★★★★
Mar 2023
The best cable machine I’ve ever seen/used.
This thing is solid and smooth. Heavy weight or light weight equally smooth.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery