Rogue CT-1X2 Cable Tower

★★★★★
★★★★★
4.3
4 Reviews
Made in U.S.A.

Rogue CT-1X2 Cable Tower

★★★★★
★★★★★
4.3
4 Reviews
Made in U.S.A.
Rogue CT-1X2 Cable Tower
CA$4,597.00
Ships in 4-6 Weeks. Pick-up not available.

Rogue CT-1X2 Cable Tower Accessories
Available Options (1)

Pulldown Handle Attachments
Pulldown Handle AttachmentsSee Details
CA$41.00

Pulldown Type (9)*

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight760LB
Length54" (depth)
Width60"
Height107.5"
Foot Print54” x 60”
Other Product SpecsRecommended minimum space requirement 10' x 10'
Product Description

This new variation on our original selectorized CT-1 Cable Tower features a dual handle system with pivoting pulleys, expanding the athlete’s range of motion and their ability to perform two-handed movements (such as cable flys, high pulls, cable press, etc.) without having to train isolaterally. Suited for large-scale facilities and garage gyms alike, this stand-alone unit does requires a minimum of 10’ x 10’ of space for optimal use and must be bolted to the floor (mounting hardware not included).

The CT-1X2 is manufactured in the USA and features a 3x3” 11-gauge steel construction with a medium gloss black powdercoat finish. The system ships fully assembled and comes with many of the same components as our Monster Lat Pulldown 2.0 machine, including 6” machined aluminum pulleys, a 1/4” USA MIL Spec cable, and an adjustable diamond-tread footplate. With the 300LB weight stack, the two pulleys can also combine to create a 1:1 ratio when connected together. So while each handle has a max weight of 150LB, the resistance is maxed at 300LB if they are joined at the same attachment point (via the included carabiners). The weight stack is adjustable by 10LB increments and has 1” band attachment pegs at the top and bottom, allowing banded work to be incorporated into any movement. Protective 14-gauge shrouds are also provided on each side of the stack to help avoid pinch points.

The dual handle system on the CT-1X2 Cable Tower can be quickly set up high or low depending on the workout, utilizing the knurled stainless steel adjustment handle. There are 16 different height adjustment settings on the 2x2 rail, and with acetal pads inside the handle assembly, users can easily move the swivel up and down without damaging the stainless slide tube. The low row foot deck is adjustable, as well (with 8 settings), and has a diamond-tread plate and texture black finish for a reliable grip.

Read More

Rogue CT-1X2 Cable Tower

This new variation on our original selectorized CT-1 Cable Tower features a dual handle system with pivoting pulleys, expanding the athlete’s range of motion and their ability to perform two-handed movements (such as cable flys, high pulls, cable press, etc.) without having to train isolaterally. Suited for large-scale facilities and garage gyms alike, this stand-alone unit does requires a minimum of 10’ x 10’ of space for optimal use and must be bolted to the floor (mounting hardware not included).

The CT-1X2 is manufactured in the USA and features a 3x3” 11-gauge steel construction with a medium gloss black powdercoat finish. The system ships fully assembled and comes with many of the same components as our Monster Lat Pulldown 2.0 machine, including 6” machined aluminum pulleys, a 1/4” USA MIL Spec cable, and an adjustable diamond-tread footplate. With the 300LB weight stack, the two pulleys can also combine to create a 1:1 ratio when connected together. So while each handle has a max weight of 150LB, the resistance is maxed at 300LB if they are joined at the same attachment point (via the included carabiners). The weight stack is adjustable by 10LB increments and has 1” band attachment pegs at the top and bottom, allowing banded work to be incorporated into any movement. Protective 14-gauge shrouds are also provided on each side of the stack to help avoid pinch points.

The dual handle system on the CT-1X2 Cable Tower can be quickly set up high or low depending on the workout, utilizing the knurled stainless steel adjustment handle. There are 16 different height adjustment settings on the 2x2 rail, and with acetal pads inside the handle assembly, users can easily move the swivel up and down without damaging the stainless slide tube. The low row foot deck is adjustable, as well (with 8 settings), and has a diamond-tread plate and texture black finish for a reliable grip.

A pair of Rogue Single Handle Cable Attachments are included standard, but customers can select other compatible attachments, such as the Rogue Tricep Strap or Leather Tricep Strap, with their order (at additional cost).

IMPORTANT: For the safety of the equipment and the athletes using it, the CT-1X2 Cable Tower must be bolted securely to the floor. Mounting hardware is not included.

This product is made to order and all returns carry a 20% restock fee for the standard black colorway.  All sales are final for custom colors.

 Shipping Notice:  The Cable Tower ships fully assembled from our Reflex Factory in Davenport, Iowa . The unit ships freight, bolted to a skid, with custom metal brackets included for added protection. This product ships on an oversized skid that is not able to be delivered using a traditional liftgate.  If you do not have a freight loading dock, additional measures may be necessary in order to deliver this unit.

Gear Specs

Specifications:

  • Made in the USA
  • Stand-Alone Construction, 3x3” 11-gauge steel (Must be bolted to floor, mounting hardware not included)
  • Product Weight: 760 LBS
  • Height: 107.5"
  • Foot Print: 54” x 60”
  • 300 LB Weight Stack (10 LB increments)
  • Choice of 1:1 and 2:1 Ratio with Weight Stack (Max of 150LB or 300 LB)
  • Medium Gloss Black powdercoat finish
  • 6” Machined Aluminum Pulleys + UHMW covers
  • 1/4” Cable built to US Mil Spec for aircraft cable
  • Dual-Handle Pulley Assembly: 16 adjustable height positions
  • Low Row Foot Deck w/ Diamond Plate Tread & Texture Black Finish - 8 position settings
  • Custom Black Carabiner
  • 1”Plastic Covered Band Attachment Pegs at top and bottom of weight stack
  • 1” Hardened Guide Rods
  • Patent Pending Design
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

What Sets the Rogue CT-1X2 Cable Tower Apart:

2:1 and 1:1 Stack Options
1

2:1 and 1:1 Stack Options

The CT-1X2 has a 300LB weight stack (compared to the 250 LB stack of the standard CT-1), which gives the athlete the option of training at a 2:1 ratio (with a single carabiner on each side, 150LB max) or a 1:1 ratio (with both carabiners connected for a 300 LB max). The weight stack is adjustable by 10LB increments and has 1” plastic band attachment pegs at the top and bottom, allowing banded work to be incorporated into any movement.

Dual Handle System
2

Dual Handle System

Rather than a traditional single-handle column, the CT-1X2 features dual swivel pulleys with a pair of Rogue Single Handle Cable Attachments included standard. The pulleys and cables are protected by UHMW plastic and can be adjusted to 16 different height settings. Their pivoting design allows for a full range of motion during most movements, and enables athletes to effectively train cable flys, high pulls, cable presses, and other two-handed movements that would have to be done isolaterally in a single-handle set-up. In addition to the included handle pair, customers can add other compatible attachments to their order, including the Rogue Tricep Strap, Leather Tricep Strap, Grip Triangle, Tricep Push Down Attachment, and a wide array of Monster Resistance Bands.

Quality Rogue Construction
3

Quality Rogue Construction

Made in the USA from 3x3” 11-gauge steel, this 107.5" tall, 760 LB Cable Tower is engineered for the use of athletes in a large-scale pro, collegiate, or high school training facility, as well as for personal use in home gyms. While it creates just a 54” x 60” footprint, the unit requires a recommended 10’ x 10’ of space and should be mounted to the floor in all cases (mounting hardware not included). The column’s 6” aluminum pulleys and 300 LB weight stack are both machined in-house, and the 1/4” cable itself is made to the same military specifications as aircraft cable; jacketed in nylon for superior flexibility and durability.

Finish Detailing
4

Finish Detailing

The main body of the tower includes a quality Medium Gloss Black Powdercoat finish, while the diamond-tread footplate is given its own texture black coating for optimal grip. Protective 14-gauge shrouds with laser-cut Rogue branding are also provided on each side of the weight stack to help avoid pinch points.

Recommended Products

Reviews

1 - 4 of 4 Reviews
Heberto
★★★★★
★★★★★
February 16
Not that smooth
The equipment is about 9 feet tall and don’t have that much cable lengths.
Originally posted on roguefitness.com
Steeler Fan
Tiffin Ohio
★★★★★
★★★★★
Oct 2023
Rogue CT-1X2 Cable Machine
I purchased this item and had it about two months now and would definitely recommend it BUT before buying ensure you read the specifications and know that the weights are attached. In total I would estimate it around 700 pounds and I could not imagine trying to move it anywhere but GROUND LEVEL. The only drawback is the weight stack is in 10 lbs increments (4 stars) I would think that Rogue would have supplied a 5 or 2.5 lbs accessory weights.
Yes, I recommend this product
Originally posted on roguefitness.com
Wilder_06
Virginia
★★★★★
★★★★★
Jan 2023
Game Changer!
I bought this over a month ago and have been extremely happy with my purchase! High quality, extremely heavy duty, and well built. Smooth operation with no snag points.
Yes, I recommend this product
Originally posted on roguefitness.com
Bakersfield
★★★★★
★★★★★
Dec 2022
Great Cable machine for garage
I’ve only had this piece for about a week but I already love it. I’ve been waiting for a machine like this for quite some time. Other machines are too big and won’t fit in my 9ft high garage, or the other cable machine Rogue offers only has 1 cable pulley. Once they released this machine that was small enough to fit in my garage and had two cable pulleys it’s what I’ve been waiting for. Overall: This machine is amazing. The cables are very smooth. The dozens of exercises you are able to do makes this machine worth it. The fact is arrives fully assembled is an added plus. The attachments that come along with the machine are very “rogue like”, meaning they are heavy and durable. If I have to nitpick, there are only a few things. -Be careful about the delivery. I never received a call about the delivery. This machine is over 1000lbs. They advise you have a forklift to get it off the truck. I did not. My delivery guy was awesome and worked with me to get it off his truck. It easily could have been a failed delivery. -I’m a trainer, they weight stack finishes at #300lbs, starts at #20lb. I train older clients, and even 20lbs is too much for an isolated move like a tricep extension. The weight stack has only #10lb incremental jumps. I would like to see a 5lb attachment you can add on top of the stack to allow for smaller jumps. -lastly, the 2 pulleys are heavy!!! So when folding the cables up and down to adjust the cables from high to low it takes effort. This is understandable, but something that should be noted.. In all, as a trainer out of my garage, this is a perfect fit. It is a bit pricey but I’ve been missing a cable element in the garage setting. I have an air runner, and for the same price of the runner all I can do is run while on this machine I have tons of options and workouts. If you have the finances, yes it’s worth it. This machine is built to perfection and seems durable (so far). I was worried about cable chest flys as it was not in the description as an option but even chest flys are smooth and doable. I plan on uploading a video soon, if you’re still on the fence.
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery