Rather than purchasing a complete, stand-alone parallel bar station, both large and small training facilities can benefit from the convenience and space efficiency of this bolt-together, rig-mounted system. Compatible with the 70" depth of most Rogue Infinity or Monster Lite units, our Rig Mount Parallel Bars are easy to install, and open up a wide range of new gymnastic training movements, including: dips, V-Sit, L-Sit, tuck, planches, push-ups, leg raises, archer rows, and more. ]

The four mounting brackets feature mounting holes 1"-on-center, so they can be mounted at any desired height on an Infinity / Monster Lite upright, from the lower Westside hole spacing to the higher 2"-on-center hole spacing. Users can then adjust where the bolt goes through on the brackets to custom-set the width of the parallel bars. The arc of holes for the bottom bolt allows the parallel bars to be set at the following widths (from center of bar to center of bar): 18.5" , 20" , 23" , 27.5" (adjustable).

Please Note: The brackets need to be securely bolted after each adjustment.

Rogue’s Rig Mount Parallel Bars are manufactured in the USA and feature an innovative bolt-together design; simple to setup using the included 0.625" hardware. The brackets are made from 0.3125" laser cut and formed steel brackets, with laser-cut Rogue branding on the inside of each. The bars themselves, made from Sch. 40 pipe, are 1.9" (bars) diameter with a usable length of 69.5". Both the bars and the brackets are finished in our signature texture black powder coat, ensuring a secure grip when training through gymnastic type movements.

Gymnastics inspired equipment trains balance, explosiveness, core strength, and many other factors key to a wide range of athletic pursuits. Rogue’s Parallel Bars make a good complement to some of our other gymnastics and bodyweight training gear, including Rogue Rings, parallettes, gymnastics grips, and more.

The Rig Mount Parallel Bar system includes (4) mounting brackets, (2) bars, and all required 0.625" hardware. The bars themselves are fastened to the brackets using a Socket Cap Screw (allen key style). So in addition to needing a 15/16" wrench to secure the brackets, users will need a 3/8" allen key to tighten the bars into place. Important: We recommend that any rig utilizing the parallel bars is securely fastened to the floor prior to use.