Rogue RML-3W Fold Back Wall Mount Rack
Rogue RML-3W Fold Back Wall Mount Rack
Rack Depth*
Add Stringer Pair*
Product Description
Space Saving Power Rack, Made in the USA
The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.
Read More
ROGUE RML-3W FOLD BACK WALL MOUNT RACK
Space Saving Power Rack, Made in the USA
The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.
A Rogue original Fold Back Rack is built with two 3x3" 11 gauge steel uprights, laser cut in Columbus, Ohio, with Westside hole spacing through the bench/pull area, and 2"-on-center spacing above and below. All steel is powder coated in the Rogue factory for a durable finish.
Optional Stringers
For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel, measuring 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.
ATTN: Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.
Gear Specs
Specifications
- Made in the USA
- Fully Retractable Power Rack
- Uprights: 3x3" 11 gauge steel, 90.375" height
- Inside Depth: Inside depth - 21.5" or 41.5"
Stringer Not Included - (1) Set of Monster Lite J-Cups
- (4) Mounting Brackets
- (4) 5/8" x 5" Detent Pins
- (1) Quick-attach Pull-Up Bar
- (2) 5/8" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
- (2) UHMW Plastic Caps to protect floor
- Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10-1/8" tall, 13/16" extension off the mounting surface
See More: Rogue Power Racks
Shipping
Rogue Fast Shipping
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.
Gear Specs | |
| Brand | Rogue Fitness |
| Made In USA | Yes |
| Product Weight | 163LB or 190LB |
| Length | From Wall - 24.75" or 43.75" |
| Width | 56.1875" Overall (On Wall) 49" Outside Uprights 43" Inside Uprights |
| Height | 90.375" |
| Foot Print | 24.75" or 43.75" x 56.1875" (On Wall) |
| Steel Notes | 3x3" 11 gauge steel |
| Other Product Specs | Inside depth - 21.5" or 41.5" Stringer Not Included |
KEY FEATURES OF THE RML-3W
HEAVY GAUGE AMERICAN STEEL & HARDWARE
The RML-3W uses heavy-duty 3x3" 11 gauge steel uprights with 5/8" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The RML-3W rack is compatible with most of our exclusive ML accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.
CHOICE OF DEPTH
The Fold Back Rack is available in two depths: 21.5" and 41.5". In the 21.5" version, the sides of the rack will position flush against the wall whether you swing them inward (towards each other) or outward. With the 41.5" depth rack, both sides need to be folded outward or one inward and one outward. For most setups the 21.5" is the best choice. Choose 41.5" if you need more space in the rack for gymnastic movements.
FIT, FINISH & LIFETIME WARRANTY
Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The RML-3W is guaranteed by Rogue for Life.
SPACE EFFICIENCY
The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5" of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.
EASY INSTALLATION + OPTIONAL STRINGERS
Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2" on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (3/8" x 2-1/2" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.
