Rogue RML-690C Power Rack 3.0 - Charcoal

★★★★★
★★★★★
0
0 Reviews
Made in U.S.A.
Product Image

Rogue RML-690C Power Rack 3.0 - Charcoal

★★★★★
★★★★★
0
0 Reviews
Made in U.S.A.
Rogue RML-690C Power Rack 3.0 - Charcoal - Numbered
CA$3,334.00

Rogue RML-690C Power Rack 3.0 - Charcoal Accessories
Available Options (2)

SAML-24 Monster Lite Safety Spotter Arms (Pair)
SAML-24 Monster Lite Safety Spotter Arms (Pair)See Details
CA$234.00
Concrete Anchor Kit
Concrete Anchor KitSee Details
CA$49.00

Gear Specs

BrandRogue Fitness
ColorCharcoal Gray
Made In USAYes
Product Weight530LB
Length76"
Width49"
Height90.375"
Foot Print80" x 53"
Steel Notes3x3" 11 gauge steel, Westside Hole Spacing
Product Description

The RML-690C Power Rack 2.0 is available here in a special edition Charcoal colorway with some of our most popular Monster Lite add-ons included at a discounted price. The distinctive, textured charcoal gray upright finish has long been a favorite of the Rogue team in our custom installations, and it’s now being offered to the general public for the first time in this limited run, combined with a loaded line-up of accessories, including:

The Monster Lite Strap Safety System 2.0 - Made from 3" wide reinforced nylon, safety-rated for 10,000 LBS, with 0.3125" thick brackets (textured black) and a 5/8" diameter pin. The front and back ends of the strap hangers can be mounted at different heights, allowing a dropped bar to roll safely away from an athlete on a missed lift. 

5/8” Ghost Roller J-Cups 2.0 - A patented conical roller (composite) and multi-radius concave receiver ensure each racked bar (25mm-50mm in diameter) safely returns to the front of the J-cup in an optimal position for the next lift. Includes fully welded, reinforced pin with a complete channel, plus UHMW linings to protect both the rack and the bar. Available here in a textured black finish.

Laser-Cut Rogue Nameplate - Brings added stability to the unit while the textured black-on-black finish of the plate and crossmember make a great pairing with the distinct upright finish of the Charcoal edition.

8 Plate Storage Pins - (4) Long and (4) Short pins; offering a huge amount of secure plate storage at an arm’s reach. One long pin, at a usable length of 12.5”, can hold 180 LBS in plates (will vary depending on plate type). Available here in a Textured Black finish.

The Charcoal RML-690 Rack is manufactured in Columbus, Ohio, from 3x3” 11-gauge steel, with (6) 90” uprights and an overall footprint of 80” x 53”. It also comes standard with Slinger-compatible crossmembers, (1) 43” Single Pull-Up Bar, (4) band pegs, and all required 5/8” bolts and fasteners (all in black). 

Please Note: The Charcoal Edition of the RML-690C cannot be selected with different color finishes on any of its components. For more colorway options, see the standard Rogue RML-690C Rack.

Read More

Rogue RML-690C Power Rack 3.0 - Charcoal

The RML-690C Power Rack 2.0 is available here in a special edition Charcoal colorway with some of our most popular Monster Lite add-ons included at a discounted price. The distinctive, textured charcoal gray upright finish has long been a favorite of the Rogue team in our custom installations, and it’s now being offered to the general public for the first time in this limited run, combined with a loaded line-up of accessories, including:

The Monster Lite Strap Safety System 2.0 - Made from 3" wide reinforced nylon, safety-rated for 10,000 LBS, with 0.3125" thick brackets (textured black) and a 5/8" diameter pin. The front and back ends of the strap hangers can be mounted at different heights, allowing a dropped bar to roll safely away from an athlete on a missed lift. 

5/8” Ghost Roller J-Cups 2.0 - A patented conical roller (composite) and multi-radius concave receiver ensure each racked bar (25mm-50mm in diameter) safely returns to the front of the J-cup in an optimal position for the next lift. Includes fully welded, reinforced pin with a complete channel, plus UHMW linings to protect both the rack and the bar. Available here in a textured black finish.

Laser-Cut Rogue Nameplate - Brings added stability to the unit while the textured black-on-black finish of the plate and crossmember make a great pairing with the distinct upright finish of the Charcoal edition.

8 Plate Storage Pins - (4) Long and (4) Short pins; offering a huge amount of secure plate storage at an arm’s reach. One long pin, at a usable length of 12.5”, can hold 180 LBS in plates (will vary depending on plate type). Available here in a Textured Black finish.

The Charcoal RML-690 Rack is manufactured in Columbus, Ohio, from 3x3” 11-gauge steel, with (6) 90” uprights and an overall footprint of 80” x 53”. It also comes standard with Slinger-compatible crossmembers, (1) 43” Single Pull-Up Bar, (4) band pegs, and all required 5/8” bolts and fasteners (all in black).

Please Note: The Charcoal Edition of the RML-690C cannot be selected with different color finishes on any of its components. For more colorway options, see the standard Rogue RML-690C Rack.

Gear Specs

Specifications

  • Made in the USA
  • Uprights: 3x3” 11-Gauge Steel - 90” Height
  • NEW Limited Ed. Textured Charcoal Gray upright finish
  • 5/8” Bolts and Fasteners - IL Black
  • Footprint: 80” x 53”
  • West Side Hole Pattern – 1” through bench and clean pull zone then 2” spacing above and below
  • Stabilizing Rogue Nameplate - Text Black crossmember, Text Black laser-cut Rogue branding
  • Holes in top/bottom of crossmembers for Slinger compatibility
  • (1) 43” Single Pull-Up Bar - Text Black
  • (2) Ghost Roller J-Cups - Text Black
  • (2) M-Lite Strap Safeties - Text Black brackets
  • (4) Band Pegs - IL Black
  • (4) Long and (4) Short Plate Storage Pins - Text Black


Key Features of the RML-690C Power Rack 3.0

Limited Edition with Premium Add-Ons
1

Limited Edition with Premium Add-Ons

This limited edition of the RML-690 is inspired by a colorway and configuration used in some of our favorite custom installations with top-tier Monster Lite accessories. As with the standard edition, the Charcoal RML-690 Rack is Made in the USA using 3x3" 11-gauge steel tubing with 5/8” holes in the Westside pattern. It comes standard with J-cups, strap safeties, a 43” single pull-up bar, (4) band pegs, and (8) plate storage pins for the back section of the unit. It can also be customized with our full line-up of exclusive Monster Lite add-ons and attachments.

Please Note: This unit does not need to be bolted to the floor, but it's still recommended for maximum stability (floor mounting hardware not included) A concrete anchor kit is also available to add to your order in the options menu.

Unique Charcoal Finish
2

Unique Charcoal Finish

This special edition of the RML-690C Rack introduces a new textured charcoal gray upright finish, which we’ve combined with a textured black single pull-up bar, crossmembers, logo plate, strap safety brackets, plate posts, and J-cups (plus black hardware) for a very distinct look. The charcoal colorway is one we’ve used in custom installations with great, long-lasting results, and it’s available here to the public for the first time in a limited run. The color finishes cannot be changed with this edition. See our standard RML-690C Rack 3.0 page for more options.

Ghost Roller J-Cup Pair
3

Ghost Roller J-Cup Pair

The Ghost Return Roller J-Cup 2.0 can comfortably accommodate barbell shafts ranging from 1” (25 MM) to 2” (50 MM) in diameter. The compact design makes it less likely that an athlete will make accidental contact with the J-cups when benching or squatting, and the roller feature enables much safer and easier centering of the barbell prior to lift off. Included here with a composite roller and textured black finish. Rackable Depth: 2.875".

Rogue Nameplate
4

Rogue Nameplate

This laser-cut, Rogue-branded plate features an exclusive black-on-black format with a texture black nameplate + crossmember. Along with creating a fantastic look above the charcoal uprights, this feature also adds extra lateral stability to the unit, as well.

Monster Lite Strap Safeties
5

Monster Lite Strap Safeties

These 3" wide reinforced nylon straps are designed to prevent damage to barbell knurling on any missed lift, or to roll the bar safely away from the user on a drop. Rated for 10,000 LBS. A clasp and pin design securely locks the system into place and allows for easy, quick adjustments. Available here with a textured black bracket finish.

Combine with Other Monster Lite Products
6

Combine with Other Monster Lite Products

You can customize your system with the addition of a bar, bench, plates, or a range of compatible tools and accessories designed specifically for the Rogue Monster Lite Series. This includes our SAML-24 Safety Spotter Arms, the Rogue ML Matador, Adjustable Monolift, Plate Storage Channel Pair, the Single Bar Holder, the Slinger, and many more.Version 3.0 is specifically design for better compatibility with the lat-pulldown Slinger system, as holes are now included the in the top and bottom of the crossmembers to allow the cable to pass through freely.