Live Chat

Rogue RML-90SLIM Door Mount Fold Back Rack

★★★★★
★★★★★
4.9
8 Reviews
Made in U.S.A.

Rogue RML-90SLIM Door Mount Fold Back Rack

★★★★★
★★★★★
4.9
8 Reviews
Made in U.S.A.
CA$783.00
Product Description

The Rogue RML-90SLIM Door Mount Rack is a fold-back version of our space-efficient 90” Slim Rack, optimized with a unique, split-stringer design for mounting the unit around a door frame. There are two key benefits to this set-up:

1. Gym owners get the minimal depth of a 2-upright Slim Rack without the limitations of having a wall right behind the rack. This means athletes can comfortably perform kipping pull-ups without fear of kicking the wall.

2. The open doorway enables an incline bench set-up that’s not possible with standard wall-mounted Slim Racks.

Read More

The Rogue RML-90SLIM Door Mount Rack is a fold-back version of our space-efficient 90” Slim Rack, optimized with a unique, split-stringer design for mounting the unit around a door frame. There are two key benefits to this set-up:

1. Gym owners get the minimal depth of a 2-upright Slim Rack without the limitations of having a wall right behind the rack. This means athletes can comfortably perform kipping pull-ups without fear of kicking the wall.

2. The open doorway enables an incline bench set-up that’s not possible with standard wall-mounted Slim Racks.

The Rogue Door Mount Rack is manufactured in the USA and features two 3x3” 11-gauge steel uprights (with laser-cut numbering and protective UHMW feet), a Monster Lite Adjustable Pull-up Bar, and a set of standard Monster Lite J-Cups. Our convenient hinge-and-pin system ensures that the uprights are secured in place when the pin is fastened, and that they can easily fold back (away from the door frame) when not in use. When folded, the unit extends just 5” off the mounting surface, opening up substantial room in a training space.

Is My Doorway Compatible?

We’ve ensured that this unit will fit all standard door widths of 28”, 30”, 32”, and 36”. The four stingers provided with the Door Mount Rack are designed to butt up to the edge of the door frame, and should be mounted just outside of the trim around the door. This means that the maximum compatible width of the door + trim is 42.25” (36” nominal door with 3” trim on each side). The stringers themselves are 19.5” wide, so adequate wall-mounting space with be needed on both sides of the door frame, as well.

Please Note: If your selected doorway still includes an attached door, customers should be aware of the direction that the door swings and factor that into overall compatibility. If the door swings back in the direction of the rack, it will still be useable in the same way as a standard Slim Rack, but without the unique benefits of having the extra space behind the unit.


*Stringer height can be adjusted in 2” increments on the wall, so the max height of the pull-up bar is dependent on the placement of the stringers.

Gear Specs

Specifications

  • Made in the USA
  • Patent Pending
  • Doorway-Mounted Slim Rack
  • 3x3” 11-gauge steel uprights w/ UHMW feet caps
  • Unit Height (with feet): 90.375”
  • Weight: 170 LBS (Including stringers & pull-up bar)
  • Depth from Mounting Surface: 13" (when in use) / 5" (when folded)
  • Width: 49.1875" (Outside Uprights), 43.1875" (Inside Uprights)
  • 4 Stringers: 11-gauge steel, laser-cut Rogue branding, 19.5” width each
  • ML Adjustable Pull-Up Bar - 86.5” max height, to center of bar*
  • Finish: Texture Black Powdercoat
  • Monster Lite J-Cups and Required Hardware included
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Loading

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight170LB (Including Stringers & pull-up bar)
Length13" (depth from mounting surface) / 5" (depth when folded)
Width49.1875" Outside Uprights 43.1875" Inside Uprights
Stringer width : 19.5" (total - 1 stringer)
Height90.375"
Steel Notes3x3" 11 gauge steel
Other Product SpecsMax pull-up bar height - 86.5" to center of bar
Loading
1

SPACE-EFFICIENCY WITHOUT RESTRICTION

Whether used in a large, high-traffic gym or an individual home gym with limited room to work with, the Door Mount Rack offers the minimal depth of a Slim Rack and hinge-and-pin convenience of the Fold-Back Rack, all while opening up more training possibilities by taking part of the “wall” out of the wall-mount equation. Kipping pull-ups and incline bench set-ups are instantly made possible by having the open doorway behind the rack, and there is potentially more room for extra Monster Lite compatible accessories and add-ons.

Loading
2

WORKS WITH MOST STANDARD DOORWAYS

The split-stringer design of this rack makes it compatible with standard doors widths of 28” / 30” / 32” / 36”. The 19.5” wide stringers are made from 11-gauge laser-cut and formed steel, and should be mounted just outside of the trim around the door (any total door + trim width greater than 42.25” will NOT be suitable for set-up). The height of the stringers can be adjusted in 2” increments, and gym owners may have to remove base trim to mount the bottom stringers, depending on the height at which they want them. Wood lags are included with all orders. Please Note: The benefits of the rack are best achieved with doorways in which there is either no attached door, or in which the door opens outward, away from the rack.

Loading
3

QUALITY ROGUE CONSTRUCTION

Made in the USA, the Door Mount Rack features (2) 3x3” 11-gauge steel Monster Lite uprights with laser-cut numbering and protective UHMW feet (true overall height of the unit, with the feet, is 90.375”). The included Monster Lite Adjustable Pull-up Bar attaches via a new pin and swing-down method, which locks it into position and makes it easier to disassemble after a workout. All orders also come with a set of standard Monster Lite J-Cups, black zinc hardware for mounting the uprights to the crossmembers, and bright zinc bolts for the hinge brackets. The finish on all other main components is our texture black powdercoat.

Recommended Products

Reviews

1 - 8 of 8 Reviews
Ariane
Québec
★★★★★
★★★★★
June 24
Great rack, please write an instruction's manual
Seriously a great rack, especially if you dont have that much space. The only anoying thing is that ROGUE didn't write a manual to build it yet, so we had to figure out most of it through articles and other plans that they send.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0

Response from Rogue Fitness:

June 24
We're very sorry that you did not receive the instructions for your rack and are sending this over right away.
jkjones3644
Newport News, VA
★★★★★
★★★★★
April 4
Great Rack!
Just installed this in my garage this is the first piece of Rogue equipment I bought and I’m very much satisfied. I mainly use it for squatting and bench press.
Yes, I recommend this product
Originally posted on roguefitness.com
Aceman
London, Ontario Canada
★★★★★
★★★★★
Jun 2021
Excellent piece of equipment
Purchased this as I needed a wall rack system in my basement, as Covid made home gyms a must. The equipment itself is very well made, and installed easily. The shipping was a bit unusual as parts come in on different days, and made tracking everything tough. All in all, it was covid and very busy shipping times. I use it for bench work and squats and can pack some heavy weight on without issue. It was my first purchase of Rogue equipment, but I am now a fan!
Yes, I recommend this product
Rogue wall rack over door
Helpful?
Yes · 1
No · 0
Vivek
Canada
★★★★★
★★★★★
May 2021
Solid, functional and looks pretty good
Only downside to the door-mount version is it doesn't have room to accommodate the pulley systems that are designed for all the other Monster Lite racks. I really wanted that so it's a bit of a let-down but everything else is great. So sturdy, looks really good in the home gym, uses minimal space. It's really heavy so folding the arms in/out is a bit tasking, would be nice if the bottom had a pad that slides nicely.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
TMAC28
San Diego, Ca
★★★★★
★★★★★
Feb 2021
Built USA strong !
I just installed this over the weekend and it was a easy install and this rack is built tough and made to last ! I absolutely love that it’s foldable, gives me more room when preforming other exercises and allows me to fit more equipment in my home gym. You will not regret this purchase. Thank you team ROUGE !
Yes, I recommend this product
Originally posted on roguefitness.com
OptimumPT
Swarthmore, PA
★★★★★
★★★★★
Feb 2021
Perfect fit
Sturdy and fits perfectly in our small space to make a functional rack. Great for attaching TRX also.
Yes, I recommend this product
Originally posted on roguefitness.com
aphoid
★★★★★
★★★★★
Nov 2020
Great rack for a limited space.
We only had one wall that could accommodate a wall-mounted rack, and that wall had a door in the middle of it. The RML-90 SLIMDM fit the space perfectly and is a solid piece of equipment. The hardware is heavy duty quality, and it mounted well and lets us still use the door. Note that the studs need to be spaced 16" or lower to work.
Originally posted on roguefitness.com
croyko
Pennsylvania
★★★★★
★★★★★
Oct 2020
Exactly what I needed!
I recently started outfitting my home gym post covid closures and was really missing a rack and a pullup bar. We have a basement with very low ceilings (7.5-8ft!) and not a lot of room to work with. We do have an old coal bin with a door on it and this works PERFECTLY. The construction is solid, the pullup bar is easy to move. And it doesn't take up a ton of space. I highly recommend it!
Yes, I recommend this product
Originally posted on roguefitness.com
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery